3MP Color CMOS Cameras – unbuffered

$239.00USD$499.00USD

Mightex USB 2.0 color cameras are designed for a wide variety of applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. With a USB2.0 interface and powerful PC software, the camera delivers excellent quality images, and the frame rate can be as high as 8 fps in full resolution and up to 600 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. The cameras have 4-pin GPIOs and optional built-in LED drivers. A DirectShow driver and a TWAIN driver are also provided in order to easily link the cameras with users’ applications.

Customize your product

Clear
  • Product Details
  • Specifications
  • FAQs
  • Overview
  • Downloads
  • Drawings
  • Packing List
  • Software

Mightex USB 2.0 color cameras are designed for a wide variety of applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. With a USB2.0 interface and powerful PC software, the camera delivers excellent quality images, and the frame rate can be as high as 8 fps in full resolution and up to 600 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. The cameras have 4-pin GPIOs and optional built-in LED drivers. A DirectShow driver and a TWAIN driver are also provided in order to easily link the cameras with users’ applications.

USB2.0 powered – no need for external power supply.

 

[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Specifications (Click here to download datasheet)

ParametersMCN-C030-UGLN-C030-UMCE-C030-UMLE-C030-UUnit
Board-Level/EnclosedBoard-LevelBoard-LevelEnclosedEnclosed
Number of GPIOs444No
Built-in LED DriversNoYesNoYes
Resolution2,048 x 1,536 Color
CMOS Chip½" Micron MT9T001, Rolling Shutter
Pixel Size3.2 x 3.2μm
Active Imager Size6.66 x 5.32mm
Scanning SystemProgressive
Dynamic Range61dB
Sensor SNR43dB
Gray Level8bit
Responsivity2.1V/lux-sec
Frame Rates* (@48MHz Clock)8 @2048x1536, 11 @1600x1200, 16 @1280x1024, 26 @1024x768, 35 @800x600, 50 @640x480, 80 @320x240, 130 @160x120, 175 @64x64 fps
Sub Resolutions1600x1200, 1280 x 1024, 1024x768, 800x600, 640x480, 320x240,160x120, 64x64
Shutter Speed (Exposure Time)0.04 ~ 750ms
Hardware Gains12dB
Trigger ModeWith external trigger
Trigger CableACC-CAM-DIN8
Lens MountC– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)
Built-in FiltersIR-cut (factory standard), No filter, or IR-pass
Power Consumption< 1.0 (excluding LED drivers, if applicable)W
Number of LED Driver ChannelsN.A.4N.A.4
LED Driver Max. Output VoltageN.A.5N.A.5V
LED Driver Max. Output Current (total)N.A.250N.A.250mA
Dimension51 x 51 x 29 (CS-mount) 
51 x 51 x 34 (C-mount)
58 x 58 x 34 (CS-mount) 
58 x 58 x 39 (C-mount)
mm
Weight (excluding lens)48150g
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                 Windows 2000, XP, Vista, Windows 7, 8, and 10
RAM:                                        256M or greater
Hard Disk Space:                   30M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color

USB2.0 Host Controller:     (Recommended) Intel Integrated Host Controller.

Applications:

  • Digital microscopy
  • Machine vision
  • Medical imaging
  • Semiconductor equipment
  • Test instruments
  • Document scanners
  • 2D barcode readers
  • Web camera and security video

Features:

  • 2048×1536 active pixels
  • Built-in LED drivers
  • 4-pin GPIOs
  • Simpler data processing
  • High-speed USB2.0 (480Mb/s)
  • DirectShow driver
  • TWAIN driver
  • 8fps @2048×1536, 70fps @640×480, 600fps @32×32
  • Digital output, no need for frame grabber
  • Custom programmable with SDK provided
  • External and software trigger
  • Strobe output for external flash
  • ROI & pixel skipping/binning
  • No need for external power supply
  • OEM versions available

Document Downloads: 

Mechanical Drawing Downloads:

Software Download

 

Board Level Camera, with CS-mount

Enclosed Camera, with CS-mount

WHAT’S IN A C-MOUNT CAMERA?

Standard Packing List:

  1. 1x Camera (w/o an imaging lens)
  2. 1x IR-cut filter (pre-installed, retail version only)
  3. 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)

Software Download

Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.

GRAPHICAL USER INTERFACE OF APPLICATION SOFTWARE

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.