Products / Cameras / USB Cameras / USB2.0 Cameras / S-Series Compact CMOS Cameras S-Series Ultra-Compact USB2.0 Color 3MP CMOS Cameras
S-Series Ultra-Compact USB2.0 Color 3MP CMOS Cameras
$242.00USD – $273.00USD
Mightex S-series compact USB 2.0 cameras are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have external trigger-in, strobe-out, and GPIOs. Frame rate can be as high as 6 fps in full resolution and up to 98 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
Customize your product
- Product Details
- Specifications
- Overview
- Downloads
- Packing List
- Software
Mightex S-series compact USB 2.0 cameras are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have external trigger-in, strobe-out, and GPIOs. Frame rate can be as high as 6 fps in full resolution and up to 98 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]
Specifications (Click here to download datasheet)
| Parameters | SCN-C030-U | SCE-C030-U | Unit |
| Board-Level/Enclosed | Board-Level | Enclosed | |
| Number of GPIOs | 4 | ||
| Resolution | 2,048 x 1,536 Color | ||
| CMOS Chip | ½" (5:4) Micron MT9T001, Rolling Shutter | ||
| Pixel Size | 3.2 x 3.2 | µm | |
| Active Imager Size | 6.66 x 5.32 | mm | |
| Scanning System | Progressive | ||
| Dynamic Range | 61 | dB | |
| Sensor SNR | 43 | dB | |
| Gray Level | 8 | bit | |
| Responsivity | 2.1 | V/lux-sec | |
| Frame Rates* (@48MHz Clock) | 6 @2048 x 1536 10 @1600 x 1200 12 @1280 x 1024 20 @1024 x 768 26 @800 x 600 32 @752 x 480 35 @640 x 480 64 @320 x 240 70 @1024 x 768 110 @768 x 480 110 @640 x 480 200 @320 x 240 325 @192 x 128 380 @64 x 64 | fps | |
| Sub Resolutions | Support Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4 | ||
| Shutter Speed (Exposure Time) | 1 ~ 750 | ms | |
| Hardware Gains | 0.125x ~ 8x | ||
| Trigger Mode | With external trigger | ||
| Trigger Cable | ACC-CAM-CON8 | ||
| Strobe Out | Yes | ||
| Lens Mount | C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported) | ||
| Built-in Filters | IR-cut (factory standard) or custom | ||
| Power Consumption | < 1.0 | W | |
| Dimension | 40 x 40 x 25 (CS-mount) 40 x 40 x 30 (C-mount) | 45 x 45 x 23 (CS-mount) 45 x 45 x 28 (C-mount) | mm |
| Weight (excluding lens) | 60 | 120 | g |
| * The actual achievable frame rate depends on exposure time, as well as available resources of PC system. | |||
RECOMMENDED SYSTEM CONFIGURATIONS
Processor: Pentium III 900MHz or better, or a compatible processor
Operating System: Windows 2000, XP, Vista, Windows 7, 8 and 10
RAM: 256M or greater
Hard Disk Space: 10M for software installation, plus additional space for storing captured images
Display: 24bit True Color
USB2.0 Host Controller: (Recommended) Intel Integrated Host Controller.
Features
- Ultra compact
- 4-pin GPIOs
- 2048×1536 active imaging pixels
- High-speed USB2.0 (480Mb/s)
- Digital output, no need for a frame grabber
- Custom programmable with SDK provided
- DirectShow and TWAIN driver
- USB command set for non-Windows based applications
- Linux Driver
- External and software trigger
- Strobe output for external flash
- ROI & pixel skipping/binning
- No need for external power supply
- OEM versions available
Applications
- Digital microscopy
- Machine vision
- Medical imaging
- Semiconductor equipment
- Test instruments
- Document scanners
- 2D barcode readers
Document Downloads:
- S-Series Ultra-Compact USB2.0 Color 3MP CMOS Cameras (.pdf file, 735KB)
- Camera quick start guide (.pdf file, 347KB)
- Mightex’s Camera Firmware Release Notes (.pdf file, 40.8KB)
Mechanical Drawing Downloads:
- S-series camera installation drawings (.pdf file, 78KB)
- S-series camera 3D drawing, enclosed (.stp file, 783KB)
- S-series camera 3D drawing, board-level (.stp file, 211KB)
Software Download
- S-series camera software package download (.zip file, 9.9MB), including the latest 64bit SDK and DirectShow driver.
Standard Packing List:
- 1x Camera (w/o an imaging lens)
- 1x IR-cut filter (pre-installed, retail version only)
- 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)
Software Download
- S-series camera software package download (.zip file, 9.9MB), including User’s Guide, SDK, Windows-based application software with GUI, DirectShow driver, TWAIN Driver, and example codes in VB, C++ and Delphi.
Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.
Software GUI
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.