Products / Cameras / USB Cameras / USB2.0 Cameras / C-Series CCD Cameras High-Sensitivity USB2.0 Monochrome 1.4MP 2/3″ CCD Cameras with Frame Buffers
High-Sensitivity USB2.0 Monochrome 1.4MP 2/3″ CCD Cameras with Frame Buffers
$2,400.00USD
High-sensitivity, low-noise camera with a 2/3″ Sony ICX285AL CCD sensor.
- Product Details
- Specifications
- FAQs
- Overview
- Downloads
- Packing List
- Software
Mightex USB 2.0 CCD cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 15 fps in full resolution and up to 80 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.
USB2.0 powered – no need for external power supply.
[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]Specifications (Click here to download datasheet)
| Parameters | CXE-B013-U | Unit |
| Board-Level/Enclosed | Enclosed | |
| Number of GPIOs | 4 | |
| Resolution | 1,392 x 1,040 Monochrome | |
| Bit | 8/12 | bit |
| CCD Chip | 2/3" Sony ICX285AL, Global Shutter | |
| Pixel Size | 6.45 x 6.45 | μm |
| Active Imager Size | (Diagonal) 11.0 | mm |
| Scanning System | Progressive | |
| Frame Rates* (@28MHz Clock) | 15 @1392 x 1040 29 @696 x 520 (2x2 Bin) 37 @464 x 344 (3x3 Bin) 49 @348 x 256 (4x4 Bin) 49 @348 x 256 (1:4 Skip) | fps |
| Sub Resolutions | 696 x 520(2x2 Bin), 464 x 344 (3x3 Bin), 348 x 256 (4x4 Bin),348 x 256 (1:4 Skip) | |
| Shutter Speed (Exposure time) | 0.05 ~ 200,000 | ms |
| Hardware Gains | 6 ~ 43 | dB |
| Trigger Mode | With external trigger | |
| Trigger Cable | ACC-CAM-DIN8 | |
| Trigger Delay | < 25 | μs |
| Strobe Out | Yes | |
| Lens Mount | CS– mount or C-mount | |
| Built-in Filters | IR-cut (factory standard), or IR-pass, or no filter | |
| Power Consumption | < 1.8 | W |
| Dimension | 95 x 70 x 38.5 (CS-mount) 95 x 70 x 43.5 (C-mount) | mm |
| Weight (excluding lens) | 150 | g |
* The actual achievable frame rate depends on exposure time, as well as resources available from the PC system.
RECOMMENDED SYSTEM CONFIGURATION
Processor | Pentium III 900 MHz or better, or a compatible processor |
Operating System | Windows 2000, XP, Vista, 7, 8, and 10 |
RAM | 256MB or greater |
Hard Disk Space | 30MB for software installation, plus additional space for storing captured images |
Display | 24bit True Color |
USB2.0 Host Controller | Intel integrated host controller (recommended) |
Features
• Built-in frame buffer (8 frames at full resolution)
• Support multi-camera applications
• 4 GPIO pins
• Higher sensitivity than color cameras
• 1392×1040 active imaging pixels
• Ultra compact
• High-speed USB 2.0 (480Mb/s)
• Digital output, no need for frame grabber
• Full featured SDK
• Compatible with Windows 2000, XP, Vista, Windows 7/8/10
• USB protocol for non-Windows based applications
• DirectShow, TWAIN and Linux drivers
• External and software trigger
• Strobe output for external flash
• ROI & pixel skipping/binning
• No need for external power supply
• OEM versions available
Applications
• Machine vision
• Fluorescence imaging
• Digital microscopy
• Medical imaging
• Semiconductor equipment
• Test instruments
• High-quality ID photo capture
• Document scanners
• 2D barcode readers
• Security camera
• Astrophotography
Product Datasheet:
- High-sensitivity 1.4MP monochrome 8-/12-bit 2/3″ CCD camera datasheet (.pdf file, 921KB)
- Mightex’s Camera Firmware Release Notes (.pdf file, 40.8KB)
Installation Drawings:
- Installation drawing for 1.4MP 8-/12-bit 2/3″ CCD enclosed cameras (.pdf file, 45KB)
- 3D drawing for 1.4MP 8-/12-bit 2/3″ CCD enclosed cameras (.stp file, 796KB)
Software Download:
- CCD camera software package download (.zip file, 9.6MB), including the latest 64bit SDK and DirectShow driver.
Standard Packing List:
- 1x Camera (w/o an imaging lens)
- 1x IR-cut filter (pre-installed, retail version only)
- 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)
Software Download:
- CCD camera software package download (.zip file, 9.6MB), inlcuding User’s Guide, SDK, Windows-based application software with GUI, DirectShow driver, TWAIN Driver, and example codes in VB, C++ and Delphi.
Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.