Multi-Wavelength Fiber-Coupled LED Light Sources (up to 8 wavelengths)


BioLED solutions
Fiber-coupled LED sources, single wavelength
Lightguide-coupled LED sources
 LED controllers, S/W
LED controller, dual mode
LED drivers, manual
 Fiber-optic collimators
Fiber-optic focusing module
Fiber patch cords

Mightex multi-wavelength fiber-coupled light sources are enabled by the latest LED technologies, and Mightex’s proprietary beam combining and coupling optics. Up to eight (8) LEDs are coherently combined into a single multi-mode fiber with the highest efficiency practically possible. Each LED can be powered individually or simultaneously, making the WFC-series a new class of light sources with a tunable spectrum.

The light sources are offered in two configurations: the standard configuration and the high-power configuration. Neutral beam combiners are used in the standard configuration. The standard configuration has the advantage of low cost and the most flexible wavelength plans. Any wavelength and white color may be combined in the standard configuration. For applications that require the highest possible output power, however, one should choose the high-power configuration where high-efficiency dichroic beam splitters are used to combine different wavelengths. Because not all possible dichroic beamsplitters are in stock, some wavelength combinations may require customization. Please contact us with your detailed wavelength plan to obtain a quotation for custom higher-power configurations.

A wide range of LED wavelengths from 365nm to 940nm and white colors are available for users to choose from. The selected LEDs are installed in the light source chassis in the factory. Fiber coupling is through a standard SMA port, and hence customers may use different fibers with the LED source according to the specific requirements of their applications. SMA-connectorized fiber patchcords are available in various core diameters and numerical apertures.

A 4-channel light source includes a 5-ft electrical cable, and an 8-channel source includes two such cables. Each cable has an 8-pin locking connector on one end to be plugged into the light source, and four pairs of bare-wire terminals at the other end. Each pair of terminals should be connected to a separate channel of a LED controller. Users can drive the installed LEDs individually or simultaneously using a Mightex multi-channel LED controller or other constant current sources. A cooling fan with heat sinks is built into the light source. When two or more wavelengths are running at full power, the fan should be turned on to maintain low temperature of the LED junctions, in order to prevent LED damage due to over-heating. A separate power supply is included for driving the cooling fan.

Mightex 4-channel multi-wavelength light source can be ordered with 2, 3, and 4 wavelengths, and the 8-channel source can be ordered with 5, 6, 7 and 8 wavelengths. In the standard configuration (which is NOT supported by the 8-channel source due to low efficiency), output power of each wavelength decreases with the total number of wavelengths, while in the high-power configuration the output power does not change much with number of wavelengths.
Need a custom multi-wavelength fiber-coupled LED light source?
Please call 1-416-840-4991 or email sales@mightex.com.

Click here to download Spec sheet
 

PERFORMANCE SPECIFICATIONS
HIGH POWER CONFIGURATION

Wavelength Code
Wavelength
(nm)
Iop (mA)
Vop (V)
Output Power1(mW)
2-wavelength
3-wavelength
4-wavelength
5-8 wavelength
0365
365
500
3.8
4.8 (15.0)
4.6 (14.4)
4.3 (13.5)
3.9 (12.2)
0385
385
500
3.8
4.8 (15.0)
4.6 (14.4)
4.3 (13.5)
3.9 (12.2)
0400
400
1000
3.8
4.4 (13.8)
4.2 (13.2)
4.0 (12.6)
3.6 (11.3)
0420
420
500
3.8
1.6 (5.0)
1.5 (4.7)
1.4 (4.4)
1.3 (4.1)
0455
455
700
6.8
5.6 (17.6)
5.3 (16.6)
5.1 (16.0)
4.5 (14.1)
0470
470
1000
3.9
6.0 (18.8)
5.7 (17.9)
5.4 (17.0)
4.9 (15.4)
0505
505
1000
3.9
2.8 (8.8)
2.6 (8.2)
2.5 (7.9)
2.3 (7.2)
0530
530
1000
3.9
2.4 (7.5)
2.3 (7.2)
2.2 (6.9)
1.9 (6.0)
0590
590
1000
3.9
1.3 (4.1)
1.2 (3.8)
1.2 (3.8)
1.1 (3.5)
0617
617
1000
3.9
5.2 (16.3)
4.9 (15.4)
4.7 (14.8)
4.2 (13.2)
0625
625
1000
3.9
6.1 (19.2)
5.9 (18.5)
5.5 (17.3)
5.0 (15.7)
0656
656
1000
2.7
5.2 (16.3)
4.9 (15.4)
4.7 (14.8)
4.2 (13.2)
0740
740
1000
2.2
2.4 (7.5)
2.3 (7.2)
2.2 (6.9)
1.9 (6.0)
0850
850
1000
2.1
3.2 (10.0)
3.0 (9.4)
2.9 (9.1)
2.6 (8.2)
0870
870
700
2.0
2.4 (7.5)
2.3 (7.2)
2.2 (6.9)
1.9 (6.0)
0940
940
1000
2.1
3.2 (10.0)
3.0 (9.4)
2.9 (9.1)
2.6 (8.2)
6500
glacier white
6500K
1000
3.6
-
-
-
-
5500
cool white 5500K
1000
3.9
-
-
-
-
4000
warm white 4000K
1000
3.9
-
-
-
-

1. Measured with a 400micron-core 0.22 numerical aperture (NA) fiber. Output optical power scales approximately linearly with fiber core area and NA2. With a 400micron-core 0.39NA fiber, for example, the output power will be 3.14x of the measured values using a 400micron-core 0.22NA fiber, as shown by the numbers in the brackets in the table above.

STANDARD CONFIGURATION
Wavelength Code Wavelength
(nm) 		Iop (mA) Vop (V) Radiant Flux1(mW)
2-wavelength 3-wavelength 4-wavelength
0365 365 500 3.8 2.3 1.5 1.1
0385 385 500 3.8 2.3 1.5 1.1
0400 400 1000 3.8 1.1 0.8 0.5
0420 420 500 3.8 0.8 0.5 0.4
0455 455 700 6.8 2.7 1.8 1.3
0470 470 1000 3.9 2.9 1.9 1.4
0505 505 1000 3.9 1.4 0.9 0.6
0530 530 1000 3.9 0.8 0.5 0.4
0590 590 1000 3.9 0.6 0.4 0.3
0617 617 1000 3.9 2.5 1.6 1.2
0625 625 1000 3.9 2.5 1.6 1.2
0656 656 1000 2.7 2.5 1.6 1.2
0740 740 1000 2.2 1.2 0.8 0.6
0850 850 1000 2.1 1.5 1.0 0.7
0870 870 700 2.0 1.1 0.8 0.5
0940 940 1000 2.1 1.5 1.0 0.7
6500 glacier white
6500K 		1000 3.6 1.2 0.8 0.6
5500 cool white 5500K 1000 3.9 1.2 0.8 0.6
4000 warm white 4000K 1000 3.9 1.2 0.8 0.6


Ordering Information:
Model Name Price Buy Now Availability
WFC-H2-0455-0530-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 2 channels: 455nm and 530nm.  $1,090.00USD/ea 
WFC-H2-0470-0590-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 2 channels: 470nm and 590nm.  $1,090.00USD/ea 
WFC-H2-0590-0625-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 2 channels: 590nm and 625nm.  $1,090.00USD/ea 
WFC-H2-0617-0656-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 2 channels: 617nm and 656nm.  $1,090.00USD/ea 
WFC-H4-0385-0530-0625-0850-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 4 channels: 385nm, 530nm, 625nm and 850nm.  $1,698.00USD/ea 
WFC-H4-0656-0740-0850-0940-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 4 channels: 656nm, 740nm, 850nm and 940nm.  $1,890.00USD/ea 
WFC-H7-0385-0470-0530-0617-0680-0780-0850-000 Multi-Wavelength Fiber-Coupled LED Light Source. High power, 7 channels: 385nm, 470nm, 530nm, 617nm, 680nm, 780nm and 850nm.  $3,480.00USD/ea 
Lead time: 3 weeks
WFC-S2-0455-0530-000 Multi-Wavelength Fiber-Coupled LED Light Source. Standard configuration, 2 channels: 455nm and 530nm.  $890.00USD/ea 
WFC-S2-0470-0590-000 Multi-Wavelength Fiber-Coupled LED Light Source. Standard configuration, 2 channels: 470nm and 590nm.  $890.00USD/ea 
WFC-S2-0530-0625-000 Multi-Wavelength Fiber-Coupled LED Light Source. Standard configuration, 2 channels: 530nm and 625nm.  $890.00USD/ea 
WFC-S4-0400-0470-0530-0625-000 Multi-Wavelength Fiber-Coupled LED Light Source. Standard configuration, 4 channels: 400nm, 470nm, 530nm and 625nm.  $999.00USD/ea 
All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.