Windowless USB2.0 Buffered CMOS 10-bit Monochrome 1.3MP Cameras, 32MB on-board memory

Mightex USB 2.0 cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 12 fps in full resolution and up to 150 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included, and a USB command set protocol is also provided for non-Windows based applications.

Windowless cameras are particularly useful for applications that are sensitive to multiple reflections due to the existence of the glass window in front of the CMOS sensor. One example of such an application is laser beam profiling.

 

Parameters

BTE-B013-UW  and BTE-B013-UWS

Unit

Board-Level/Enclosed

Enclosed

 

Number of GPIOs

4

 

Built-in LED Drivers

No

 

Resolution

1,280 x 1,024 Monochrome

 

CMOS Chip

½" (5:4) Micron MT9M001

 

Pixel Size

5.2 x 5.2

μm

Active Imager Size

6.66 x 5.32

mm

Scanning System

Progressive

 

Dynamic Range

68

dB

Sensor SNR

45

dB

Gray Level

10

bit

Responsivity

2.1

V/lux-sec

Frame Rates* (@48MHz Clock)

12 @1280x1024

18 @1024x768

25 @800x600

28 @752x480

33 @640x480

70 @320x240

fps

Sub Resolutions

Support arbitrary ROI, (X, Y) with X and Y multiples of 4

 

Shutter Speed (Exposure Time)

0.04 ~ 750

ms

Hardware Gains

0.125x ~ 8x

 

Trigger Mode

With external trigger

 

Trigger Cable

ACC-CAM-DIN8

 

Lens Mount

C-Mount, CS-Mount or custom-defined

 

Built-in Filters

None

 

Power Consumption

< 1.8

W

Dimension

58 x 58 x 34 (CS-mount)

58 x 58 x 39 (C-mount)

mm

Weight (excluding lens)

150

g

* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                  
Windows 2000, XP, Vista, Windows 7 and 8
RAM:                                        256M or greater
Hard Disk Space:                     10M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color

USB2.0 Host Controller:           (Recommended) Intel Integrated Host Controller.

Ordering Information:
Model Name Price Buy Now Availability
BTE-B013-UW Windowless buffered USB2.0 Monochrome 10-bit 1.3MP CMOS Cameras, C-mount  $1,299.00USD/ea 
BTE-B013-UWS Windowless buffered USB2.0 Monochrome 10-bit 1.3MP CMOS Cameras, CS-mount  $1,299.00USD/ea 
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.