USB3.0 Monochrome or Color 1.5MP Global Shutter CMOS Camera (8 or 12 bit), with on-board Buffer

$539.00USD$559.00USD

Super-speed USB3.0 cameras with a fast Sony 1.5 Megapixel Global Shutter CMOS image sensor. Up to 250 fps in full resolution and up to 600+ fps using ROI mode. Comes in color or monochrome, board-level or with enclosure.

Customize your product

Clear
  • Product Details
  • Overview
  • Specifications
  • Downloads
  • Drawings
  • Packing List

Mightex’s ultrafast USB 3.0 cameras are designed for applications that require high-speed and/or multiple cameras. These cameras are equipped with a super-speed USB3.0 interface that can deliver a transfer rate of up to 400 Mbytes per second, which is 10 times the USB2.0 speed, 3.5 times GigE speed and 6 times Firewire-800 speed. With the 1.5MP Global Shutter CMOS sensor, the frame rate can be as high as 250fps in full resolution and up to 600+fps using ROI mode. Mightex USB 3.0 cameras are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development.

USB3.0 powered – no need for external power supply.

 

[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Key Features:

  • 1408 x 1088 active imaging pixels
  • Ultra High-speed USB3.0 (400MB/s), up to 250 fps (full resolution) and 600+ fps (ROI mode)
  • 128 frame on-board buffer
  • Digital output, no need for frame grabber
  • Custom programmable with SDK provided
  • 3rd-party software support: Micro-Manager and Bonsai
  • External and software trigger
  • Strobe output for external flash
  • ROI & pixel skipping / binning (Binning is available for monochrome version only)
  • No need for external power supply
  • OEM versions available

Applications:

  • Machine vision and stereo vision
  • Digital microscopy
  • Medical imaging
  • Semiconductor equipment
  • Test instruments
  • High-quality ID photo capture

Specifications

ParametersSBN-C015-U (Color)
SBN-B015-U (B/W)
SBE-C015-U (Color)
SBE-B015-U (B/W)
Unit
Board-Level/EnclosedBoard-LevelEnclosed
Number of GPIOs44
Resolution1,408 x 1,088
Image SensorSony IMX273, Global Shutter CMOS
Pixel Size3.45 x 3.45µm
Scanning SystemProgressive
Dynamic Range~60dB
Gray Level8/12bit
Frame Rates* (@96MHz Clock)250/150 @1408x1088
450/270 @1408x544
496/270 @704x544
fps
Sub ResolutionsSupport arbitrary ROI (Nx x Ny), with Nx is always 1408, Ny multiples of 32
Shutter Speed (Exposure Time)0.05 ~ 750ms
Hardware Gains0 – 48dB
Trigger ModeWith external trigger (Trigger delay < 30µs)
Trigger CableACC-CAM-DIN8
Strobe OutYes
Lens MountC– mount or CS-mount
(M12.5-mount or custom-defined lens mount supported)
Built-in FiltersIR-cut (factory standard) or custom
Power Consumption< 3.0 (USB3.0);
< 2.5(USB2.0)
W
Dimension51 x 51 x 29 (CS-mount)
51 x 51 x 34 (C-mount)
58 x 58 x 34 (CS-mount)
58 x 58 x 39 (C-mount)
mm
Weight (excluding lens)80150g
* The actual achievable frame rate depends on exposure time, as well as available resources of the host PC system.

RECOMMENDED SYSTEM CONFIGURATION

Processor
Quad-core Intel/AMD CPU 2.4GHz or better, or a compatible processor
Operating System
Windows 7, 8, 10 and 11
RAM
8GB or greater
Hard Disk Space
100MB for software installation, plus additional space for storing captured images
Display
24bit True Color
USB3.0 Host ControllerIntel Integrated USB3.0 Host Controller is recommended

Standard Packing List:

  1. 1x Camera (w/o an imaging lens)
  2. 1x IR-cut filter (pre-installed, retail version only)
  3. 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)

Software Download:

Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.