Products / LED Controllers / Universal LED Drivers - Manual and Analog-Input Controlled BLS-Series High-Speed Two-Channel LED Drivers with Manual & Analog-Input Controls and Tool-free Connectors
BLS-Series High-Speed Two-Channel LED Drivers with Manual & Analog-Input Controls and Tool-free Connectors
High speed, manual and analog-voltage controlled LED drivers for Mightex LEDs:
- BLS-1000-2: Two(2)-channel. Three(3)-tiered output limit settings of 500/750/1,000mA. Up to 100kHz modulation speed.
- BLS-3000-2: Two(2)-channel. Three(3)-tiered output limit settings of 1,000/2,000/3,000mA. Up to 50kHz modulation speed.
Customize your product
- Product Details
Mightex BLS-1000-2 and BLS-3000-2 LED controllers are designed for driving Mightex LED sources. The controllers have two operation modes:
Manual Mode: the output current can be controlled by manually turning the knobs; or
Trigger Mode: the output current can be controlled via an external analog input signal between 0-5V.
The control mode is selected with a slide switch on the front panel, and the factory default is “Manual” mode. BLS-1000-2 and BLS-3000-2 provide Maximum Current Selection DIP switches on the rear panel, which allow the user to set the maximum output current of the channel to 500/750/1,000mA for BLS-1000-2, and 1,000/2,000/3,000mA for BLS-3000-2, respectively. The factory default is set to 500mA for BLS-1000-2 and 1,000mA for BLS-3000-2, respectively.
When the controller is set to “Trigger” mode, the output current is fully controlled by the input analog signal (0-5V).
Specifications (Click here to download datasheet)
|Power Supply Input Voltage (DC), Vdc||9 ~ 12*||9||V|
|Power Supply Input Current (DC)||> total/combined channel|
|Channel Driving Voltage (Max)||Vdc - 4.5||V|
|Max Voltage Difference|
(Power Supply Vdc - LED Vop)
|< 8||< 6||V|
|Output Driving Current Range||0 ~ 1,000||0 ~ 3,000||mA|
|Channel Output Power Limit||< 20||< 15||W|
|Channel Frequency Response||< 100||< 50||KHz|
|External Analog Input||0 ~ 5***||V|
Note: *When Vforward of LED load is more than 8V, 24V DC input might be used; ** The input current should be greater than the combined output current of the two channels; ***External analog voltage source should have 8+ mA of current driving capability.**** It is not recommended to mix Type-A/J LEDs with Type-B LEDs on a single unit of this controller. Please operate Type-A/J LED’s on one unit and Type-B LEDs on another.
Dimensions: 221mm (L) x 156mm (W) x 96mm (H)
Front and Rear Panels:
The Front Panel has a power switch and a power indicator. Each channel has its own slide switch (for selecting Manual or Trigger mode) and a turning knob (for adjusting output current).
The Rear Panel has a DC input plug. Each channel has a BNC connector for external trigger/analog voltage signal, a two-pin LED aero connector. For BLS-1000-2 and BLS-3000-2 only, each channel has a pair of DIP switches to set the maximum current.
Mechanical Drawing Downloads:
- BLS-1000-2 and BLS-3000-2 LED Driver Installation Drawing (.pdf file, 55KB)
- BLS-1000-2 and BLS-3000-2 LED Driver 3D CAD Drawing (.stp file, 735KB)
User’s Manual Download
- BLS-1000-2 and BLS-3000-2 BioLED Control Module User’s Manual (.pdf file, 305KB)
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.