Mightex USB Cameras Quick Start Guide
|A PDF version of the Camera Quick Start Guide can also be downloaded here.|
|Before you set up and operate your Mightex camera, please download the camera’s software package and read the camera’s User’s Guide, which can be found in “/Documents” directory in the camera software package.|
|Camera Care and ESD Precaution|
1. When handling the camera device, avoid touching the image sensor or (if installed) the camera lens;
2. Avoid extended exposure to bright sunlight, rain, and dusty environments etc.;
3. Avoid excessive shaking, dropping or mishandling of the device;
4. Customers who have purchased a bare board camera should:
-Use non-chargeable gloves, clothes or material to handle the camera, and wear conductive shoes.
-Install a conductive mat on the floor or working table to prevent the generation of static electricity.
Check the below table, and download the right software package for your camera model. Extract the download software package (ZIP) to a directory of your choice on your local hard disk.
Note: The software package contains a device driver, application software, a SDK and all related documents. For more details, please refer to Mightex USB camera user’s manual, which can be found in the “\Documents” directory within the downloaded software package.
Connect the camera to your computer using a USB cable, and make sure that the connection is firm and secure. The computer should show “Found New Hardware”.
Locate new hardware in Windows Device Manager, right-click and select the option to update driver. Follow the instruction shown on your computer screen to proceed.
Check driver installation is successful and run the software.