High-Resolution High-Stability CCD Spectrometers (UV, VIS and NIR)


Fiber patchcords Full Spectrum LED Cuvette Holders Direct-Coupling Collimator Multi-channel spectrometers Default

Irradiance calibration service
Cuvette holders
Cosine corrector
Entrance slits and input adapters
Direct-couple collimators
Fiber patchcords
White reflectance standards
Multi-channel spectrometers
Full-spectrum LED sources for spectroscopy
Spectrometer sensor engine

 

 

FEATURES
* Superb temperature & long-term stability
* Interchangeable slit by customers
* Fiber input with SMA connector
* UV/VIS/NIR (200~1050nm), sub-nm resolution
* External trigger and GPIO’s
* Full-featured SDK for OEM
* USB2.0 for both data and power, no external power required
* LabView support

* Low-level USB protocol for embedded system

APPLICATIONS
* Lab research
* Process control
* Environment monitoring
   

Compact CCD spectrometers are widely used in process control, environment monitoring, and scientific research applications. Mightex HRS series compact CCD spectrometers features a high-resolution 100mm Czerny-Turner optical platform coupled with a Toshiba 3648-element CCD array. The optimized optical path yields both high spectral resolution and high light collection efficiency.


Wavelength and amplitude stability is often a critical requirement for many spectrometer applications. All optical components in the HRS series spectrometers are mounted directly on a single-piece base without using screws. A box enclosure structure further increases stiffness of the base. The proprietary mounting method ensures high stability over time and temperature change.

The spectrometer takes input through a SMA connector port. Usually a fiber patch cord is used to transmit light into the spectrometer. However it’s also possible to send the input light directly into the spectrometer through the input slit. Input ports are interchangeable so that ports with different slit size (or without slit) can be used. Note that wavelength calibration is necessary after changing the input port.

A 16-bit DAC is used to convert the analog signal from the CCD array into a digital stream. The electronics hardware also includes trigger input and four programmable digital I/Os for interfacing with other equipment such as a light source. The spectrometer is controlled through a USB2.0 interface which also supplies all the electric power needed to operate the spectrometer.

Standard software package includes a full-featured PC software as well as a software development kit (SDK) for further software development. Low level USB protocol is also provided in the software package, which supports embedded system based applications.

 

 

Ordering Information:
Model Name Price Buy Now Availability
CAL-SPC-AICETC Absolute irradiance (NIST traceable) calibration service for Mightex spectrometers, with exposure time linearity calibration. [Note: Calibration can only be done on a system level which includes a fiber and/or a cosine corrector (ordered separately).]  $249.00USD/ea 
HRS-BD1-025 High-Resolution High-Stability CCD Spectrometers (with 25 micron entrance slit), 300~1070nm Broad Band.  $2,299.00USD/ea 
HRS-BD1-xxx High-Resolution High-Stability CCD Spectrometers (with custom entrance slit), 300~1070nm Broad Band. [Note: specify slit size by email or in note when checking out.]  $2,399.00USD/ea 
HRS-IR1-025 High-Resolution High-Stability CCD Spectrometers (with 25 micron entrance slit), 700-870nm NIR  $1,760.00USD/ea 
HRS-IR1-xxx High-Resolution High-Stability CCD Spectrometers (with custom entrance slit), 700-870nm NIR. [Note: specify slit size by email or in note when checking out.]  $1,875.00USD/ea 
HRS-NIR-025 High-Resolution High-Stability CCD Spectrometers (with 25 micron entrance slit), 600-1000nm NIR  $1,720.00USD/ea 
HRS-NIR-xxx High-Resolution High-Stability CCD Spectrometers (with custom entrance slit), 600-1000nm NIR. [Note: specify slit size by email or in note when checking out.]  $1,835.00USD/ea 
HRS-UV1-025 High-Resolution High-Stability CCD Spectrometers (with 25 micron entrance slit), 200-400nm UV  $1,835.00USD/ea 
HRS-UV1-xxx High-Resolution High-Stability CCD Spectrometers (with custom entrance slit), 200-400nm UV. [Note: specify slit size by email or in note when checking out.]  $1,940.00USD/ea 
HRS-VIS-025 High-Resolution High-Stability CCD Spectrometers (with 25 micron entrance slit), 390-780nm Visible  $1,720.00USD/ea 
HRS-VIS-xxx High-Resolution High-Stability CCD Spectrometers (with custom entrance slit), 390-780nm Visible. [Note: specify slit size by email or in note when checking out.]  $1,835.00USD/ea 
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.