SLB-Series Manual & Analog-Input Controlled Universal LED Driver with Current Display

$575.00USD

Mightex’s SLB-1200-1 universal LED driver is designed for driving a broad range of LED light sources with two control modes:

  • Manual Knob Control Mode: the output current can be adjusted manually; and
  • Analog Input Control Mode: the output current can be controlled via a 0~5V analog input signal.

 

Model: SLB-1200-1
Availability: In Stock

  • Product Details
  • Specifications
  • Downloads
  • Packing List

Mightex’s SLB-1200-1 universal LED driver is designed for driving a broad range of LED light sources. The LED driver has two control modes:

  • Manual Knob Control Mode: the output current can be adjusted manually; and
  • Analog Input Control Mode: the output current can be controlled via a 0~5V analog input signal.

The control mode is set via a DIP switch, and the factory default setting is “Manual Knob Control Mode”. The driver also has a Maximum Current Setting DIP Switch, which allows user to set the maximum current to 350mA, 750mA or 1200mA, whichever applicable. The factory default setting is 350mA. When the Maximum Current Setting DIP Switch is set at a smaller value (e.g. 350mA), the LED driver has a finer resolution for the output current.

When the driver is set to “Analog Input Control Mode”, the output current is proportional to the voltage of the analog input signal.

Features:

  • Dual control modes: manual or analog-input
  • Universal – suitable for any LED
  • Tiered maximum output current settings (i.e. 350, 750 and 1200mA) to prevent overdrive
  • Capable of driving variable loads

Applications:

  • Microscopy
  • Lighting
  • Machine vision
  • Displays
  • Semiconductor equipment
  • Test instruments
  • Medical instruments

Specifications (Click here to download datasheet)

ParameterSLB-1200-1Unit
Number of Channels1
Power Supply Input Voltage (Vdc )9 ~ 24V
Maximum Output Voltage (Vmax)Vdc – 3V
Maximum Per Channel Output Current (Imax)*1200mA
Maximum Per Channel Output Power (Pmax)**10W
* The maximum output current can be set to 1200, 750 or 350 mA using the DIP switch.
** If the channel output voltage is Vd and the output current is Id, they must simultaneously satisfy: (1) Vd <= Vmax ; (2) Id <= Imax; and (3) Vd * Id <= Pmax.

CHANNEL I/O PIN DEFINITION:
Each channel has four pins, defined as follows:

Pin LabelLED+LED-Analog SignalAnalog Input GND
DescriptionLED AnodeLED Cathode0~5V Analog InputAnalog Input Ground

MECHANICAL SPECIFICATION:

Dimension150mm(L) x 106mm (W) x 55mm (H)
Weight250 g

Standard Packing List:

  1. 1x LED driver
  2. 1x 12Vdc power supply (upgradeable to 24Vdc for $19/ea)

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.