S-Series Ultra-Compact Global Shutter 752×480 Color CMOS Cameras

$179.00USD$199.00USD

Mightex S-series compact USB 2.0 cameras with global shutter are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Frame rate can be as high as 38 fps in full resolution and up to 210 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.

Customize your product

Clear
  • Product Details
  • Specifications
  • Overview
  • Downloads
  • Packing List
  • Software

Mightex S-series compact USB 2.0 cameras with global shutter are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have global shutter, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Frame rate can be as high as 38 fps in full resolution and up to 210 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.

USB2.0 powered – no need for external power supply.

 

[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Specifications (Click here to download datasheet)

ParametersSCN-CG04-USCE-CG04-UUnit
Board-Level/EnclosedBoard-LevelEnclosed
Number of GPIOs44
Resolution752 x 480 Color
CMOS Chip1/3" Micron MT9V032, Global Shutter (Micron TrueSNAP)
Pixel Size6.0 x 6.0µm
Active Imager Size4.51 x 2.88mm
Scanning SystemProgressive
Dynamic Range > 55dB
Gray Level8bit
Responsivity4.8V/lux-sec
Frame Rates* (@24MHz Clock)38 @752 x 480
40 @640 x 480
82 @320 x 240
130 @160 x 120
170 @64 x 64
fps
Sub ResolutionsSupport Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4
Shutter Speed (Exposure Time)0.05 ~ 750ms
Hardware Gains1x ~ 4x
Trigger ModeWith external trigger
Trigger CableACC-CAM-CON8
Strobe OutYes
Lens MountC– mount or CS-mount
(M12.5-mount or custom-defined lens mount supported)
Built-in FiltersIR-cut (factory standard), No filter, or IR-pass
Power Consumption< 1.0W
Dimension40 x 40 x 25 (CS-mount)
40 x 40 x 30 (C-mount)
45 x 45 x 23 (CS-mount)
45 x 45 x 28 (C-mount)
mm
Weight (excluding lens)60120g
* The actual achievable frame rate depends on exposure time, as well as available resources of the PC host system.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                           Pentium III 900MHz or better, or a compatible processor
Operating System:             Windows 2000, XP, Vista, Windows 7, 8 and 10
RAM:                                    256M or greater
Hard Disk Space:              10M for software installation, plus additional space for storing captured images
Display:                               24bit True Color
USB2.0 Host Controller: (Recommended) Intel Integrated Host Controller.

Features

  • Ultra compact
  • 4-pin GPIOs
  • 752×480 active imaging pixels
  • High-speed USB2.0 (480Mb/s)
  • Digital output, no need for a frame grabber
  • Custom programmable with SDK provided
  • DirectShow and TWAIN driver
  • USB command set for non-Windows based applications
  • Linux Driver
  • External and software trig-ger
  • Strobe output for external flash
  • ROI & pixel skipping/binning
  • No need for external power supply
  • OEM versions available

Applications

  • Digital microscopy
  • Machine vision
  • Medical imaging
  • Semiconductor equipment
  • Test instruments
  • Document scanners
  • 2D barcode readers

Document Downloads: 

Mechanical Drawing Downloads:

Software Download

Standard Packing List:

  1. 1x Camera (w/o an imaging lens)
  2. 1x IR-cut filter (pre-installed, retail version only)
  3. 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)

Software Download

  • S-series camera software package download (.zip file, 9.9MB), including User’s Guide, SDK, Windows-based application software with GUI, DirectShow driver, TWAIN Driver, and example codes in VB, C++ and Delphi.

Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.

Software GUI

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.