High-Sensitivity USB2.0 Color 1.4MP 1/2″ CCD Cameras with Frame Buffers

$699.00USD$879.00USD

Customize your product

Clear
  • Introduction
  • Specifications
  • FAQs
  • Overview
  • Downloads
  • Drawings
  • Packing List

Mightex USB 2.0 CCD cameras have high sensitivity and low noise, and they are optimized for a wide variety of applications, including machine-vision applications, digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Frame rate can be as high as 15 fps in full resolution and up to 80 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.

USB2.0 powered – no need for external power supply.
[Note: Board-level cameras are designed for OEM applications when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Specifications (Click here to download datasheet)

ParametersCCN-C013-U CCE-C013-UUnit
Board-Level/EnclosedBoard-LevelEnclosed
Number of GPIOs44
Resolution1,392 x 1,040 Color
Image Sensor Chip½" Sony ICX205AK, Global Shutter
Bit8 or 12bit
Pixel Size4.65 x 4.65μm
Active Imager Size7.60 x 6.20mm
Scanning SystemProgressive
On-Board Memory32MB
Frame Rates* (@28MHz Clock)15 @1392 x 1040, 49 @348 x 256 (1:4 Skip) , Resolution Dependant @ ROIfps
Sub Resolutions348 x 256 (1:4 Skip)
Shutter Speed (Exposure Time)0.05 ~ 200,000ms
Hardware Gains6 ~ 43dB
Trigger ModeWith external trigger
Trigger CableACC-CAM-DIN8
Trigger Delay< 25μs
Strobe OutYes
Lens MountC– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)
Built-in Filters IR-cut (factory standard), or IR-pass, or No filter
Power Consumption< 1.8W
Dimension89 x 64 x 34 (CS-mount)
89 x 64 x 39 (C-mount)
95 x 70 x 38.5 (CS-mount)
95 x 70 x 43.5 (C-mount)
mm
Weight (excluding lens)80150g

* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                 Windows 2000, XP, Vista, Windows 7/8/10
RAM:                                        256M or greater
Hard Disk Space:                   10M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color

USB2.0 Host Controller:      (Recommended) Intel Integrated Host Controller.

Applications:

  • Machine vision and stereo vision
  • Medical imaging
  • Semiconductor equipment
  • Test instruments
  • High-quality ID photo capture
  • Document scanners
  • Digital microscopy
  • 2D barcode readers
  • Web camera and security video

Features:

  • High sensitivity, low noise
  • Built-in frame buffer (8 frames at full resolution)
  • Support simultaneous image capturing from multiple cameras
  • 4-pin GPIOs
  • 1392×1040 active imaging pixels
  • Ultra compact
  • High-speed USB2.0 (480Mb/s)
  • Digital output, no need for frame grabber
  • Custom programmable with SDK provided
  • DirectShow, TWAIN and Linux drivers
  • USB command set protocol for non-Windows-based applications
  • External and software trigger
  • Strobe output for external flash
  • ROI & pixel skipping/binning
  • No need for external power supply
  • OEM versions available

Product Datasheet:

Installation Drawings:

Software Download:

Standard Packing List:

  1. 1x Camera (w/o an imaging lens)
  2. 1x IR-cut filter (pre-installed, retail version only)
  3. 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)

Software Download:

  • CCD camera software package download (.zip file, 9.6MB), inlcuding User’s Guide, SDK, Windows-based application software with GUI, DirectShow driver, TWAIN Driver, and example codes in VB, C++ and Delphi.

Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.