High-Power LED Collimator Sources, 11-mm Clear Aperture

$376.00USD$1,070.00USD

Type-A and Type-B High-Power Collimator LED Sources are listed on this page.

Click here for Type-H Super High-Power Collimator LED Sources.

Customize your product

Clear
  • Product Details
  • Specifications
  • Overview
  • Downloads

An LED collimator consists of a collimating lens and an LED emitter. The LED emitter is placed at the focal plane of the collimating lens. The collimating lens thus images the LED emitter into infinity. Mightex LED collimators employ a high-NA aspherical collimating lens for precision collimation and high light throughput.

LED collimators can be used as the light source in an illumination system. For example LED collimators can replace the standard lamp assembly in a microscope to provide stable, intense, and fast-modulated illumination. Typically the rest of the illumination optics will image the LED emitter onto the pupil of the imaging optics whereas the lens aperture on the collimator where intensity is uniform will be projected onto the object. In other illumination applications similar arrangement should be made to produce uniform and efficient illumination.

The LED emitters are mounted directly onto the metal base of the collimator which also features an integrated heat sink. This configuration minimizes thermal resistance between the LED emitter and the heat sink resulting in better heat dissipation. The collimating lens can be adjusted if needed for precise collimation. A locking ring fixes the lens position after adjustment. The collimators have been pre-adjusted in the factory.

Multi-chip LED emitters have been added to the product portfolio. Some of these 7W to 15W LEDs have total optical power exceeding 1W, quadrupling the power of a single-chip LED. Models with higher powers (7W and higher) feature a cooling fan, and have a different formfactor compared to other models. Please examine the installation drawings carefully. Power supply for the cooling fan is included in the price of the LED collimator sources.

The LED collimators include a 1.5-meter cable with two bare-wire terminals at the end. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources. An optional focusing module can be mounted on the front of the LED collimator to focus light into a tight spot which is an image of the LED emitter. One of the applications with the focusing module is coupling LED light into a fiber or a light guide.

Additional interchangeable collimating lenses are available to produce different beam sizes with the same light source.

IMPORTANT : (1) LED’s can ONLY be driven by a constant-current source, and NOT a voltage source (e.g. a battery, or a AC/DC power supply etc.); (2) Please always verify LED’s current rating first before applying current to the LED, and please always make sure NOT to apply current that is above the LED’s current rating.

Performance Specifications ( Click here to download datasheet)

For specifications of Deep UV collimator LED’s (265nm – 340nm), please refer to this page.

Type-A LCS (passively cooled with no cooling fan)
Type-B LCS (with a cooling fan)

Part NumberType 2
(A or B)
Wavelength
(nm)
Half Diverging Angle(deg.)Iop(mA)Vop(V)Typical Output
Power (mW)3
φ 11mm 1 φ 22mm 1 φ 38mm 1 φ 48mm 1
LCS-0365-04-xxA3656.83.421.510003.65350
LCS-0365-13-xxB3656.83.421.535003.851200
LCS-0385-04-xxA3856.83.421.510003.65500
LCS-0385-07-xxB3856.83.421.550015500
LCS-0385-11-xxB3856.83.421.570015.5625
LCS-0385-13-xxB3856.83.421.535003.751500
LCS-0395-03-xxA3953.41.710.7510003.1270
LCS-0395-12-xxB3956.83.421.5100012.4810
LCS-0400-01-xxA40052.51.51.13503.5100
LCS-0400-03-xxA4003.41.710.7510003.1265
LCS-0400-04-xxA4003.41.710.7510003.5750
LCS-0400-12-xxB4006.83.421.5100012.4795
LCS-0400-17-xxB40010532.2100016.5810
LCS-0405-03-xxA4053.41.710.7510003325
LCS-0405-12-xxB4056.83.421.5100012975
LCS-0410-03-xxA4103.41.710.7510003315
LCS-0410-12-xxB4106.83.421.5100012945
LCS-0415-03-xxA4153.41.710.7510003310
LCS-0415-12-xxB4156.83.421.5100012930
LCS-0430-02-xxA4303.41.710.755003.8190
LCS-0455-03-xxA4553.41.710.7510003.0500
LCS-0470-03-xxA4703.41.710.7510003.9200
LCS-0470-15-xxB4706.83.421.5100015600
LCS-0470-14-xxB4703.41.710.7530004.6800
LCS-0471-02-xxA4713.41.710.753503140
LCS-0490-01-xxA4903.41.710.753503.5140
LCS-0505-03-xxA5053.41.710.7510003.9135
LCS-0505-12-xxB5056.83.421.5100012.2250
LCS-0530-03-xxA5303.41.710.7510002.85200
LCS-0530-12-xxB5302.81.40.850.6524004.9290
LCS-0530-15-xxB5306.83.421.5100015300
LCS-0540-14-xxB540 broadband4.42.21.3130004.6500
LCS-0560-03-xxA560 broadband4.42.21.3110002.9240
LCS-0585-03-xxA585 broadband4.42.21.317002.982
LCS-0590-03-xxA5903.41.710.7510003.965
LCS-0590-05-xxB59010532.25009.5190
LCS-0617-03-xxA6173.41.710.7510003.9150
LCS-0617-10-xxB6176.83.421.5100010.8250
LCS-0625-03-xxA6253.41.710.7510003.9180
LCS-0625-07-xxB6256.83.421.57009.6300
LCS-0656-03-xxA6563.41.710.7510003.1280
LCS-0656-07-xxB6568.84.42.627009.6800
LCS-0680-02-xxA6803.41.710.756002.775
LCS-0700-01-xxA7003.41.710.755002.151
LCS-0720-01-xxA7203.41.710.756002.273
LCS-0740-03-xxA74052.51.51.110002.5200
LCS-0740-10-xxB74010532.210009.5600
LCS-0780-02-xxA7803.41.710.758002.5110
LCS-0810-02-xxA8103.41.710.758002.2120
LCS-0850-03-xxA850, 3W3.41.710.7510003430
LCS-0870-01-xxA8703.41.710.757001.9110
LCS-0910-02-xxA9103.41.710.7510001.9120
LCS-0940-02-xxA9403.41.710.7510001.8200
LCS-0980-01-xxA9803.41.710.755001.430
LCS-6500-03-xxAglacier white 6,500K3.41.710.7510003.6180
LCS-6500-15-xxBglacier white 6,500K6.83.421.5100015540
LCS-5500-03-xxAcool white 5,500K3.41.710.7510003.9170
LCS-5500-12-xxBcool white 5,500K6.83.421.5100012540
LCS-4000-03-xxAwarm white 4,000K3.41.710.7510003.9180
LCS-3000-03-xxAwarm white 3,000K3.41.710.7510002.8150
LCS-3000-12-xxBwarm white 3,000K6.83.421.5100012430

1. Clear aperture diameter. Use these two-digit numbers to replace xx in the part number; and 2. Type-A and Type-B collimator sources have different installation drawings. Type-A does not include a cooling fan, whereas Type-B does. When ordering an LED controller for a Type-B LED, please make sure to upgrade the AC/DC power adapter from the ‘standard’ 12V to 24V. For certain LED controllers, it is not recommended to mix Type-A and Type-B LEDs on the same controller. Please check controller specification to confirm. 3. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Type-J LCS (high power, passively cooled with no cooling fan)

Part NumberTypeWavelength
(nm)
Half Diverging Angle(deg.)Iop(mA)Vop(V)Typical Output
Power (mW)2
φ 11mm 1 φ 22mm 1 φ 38mm 1 φ 48mm 1
LCS-0365-13-22-JJ365NA3.4NANA35003.851200
LCS-0470-14-22-JJ470NA1.7NANA30004.6860
LCS-0530-12-22-JJ530NA1.4NANA24004.9290
LCS-0540-14-22-JJ540NA2.2NANA30004.6500
LCS-0625-07-22-JJ625NA1.4NANA24002.9260

1. Clear aperture diameter. Use these two-digit numbers to replace xx in the part number. 2. Maximum CW output achievable with a BLS-3000-2 BioLED control module. 3. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Type-H LCS (high current, with a cooling fan)

Part NumberTypeWavelength (nm)Half Diverging Angle(deg.)Iop(A)Vop(V)Typical Output
Power (mW)2
φ 22mm 1 φ 38mm 1 φ 48mm1
LCS-0365-76-xxH365532.2184.210000
LCS-0405-65-xxH405532.2183.68300
LCS-0405-89-xxH405532.2243.79900
LCS-0470-50-xxH470532.2133.86300
LCS-0470-61-xxH470532.2183.47500
LCS-0470-92-xxH470532.2273.49000
LCS-0525-60-xxH525532.2134.61300
LCS-0525-79-xxH525532.2184.41560
LCS-0560-68-xxH560 broadband532.2183.83500
LCS-0560-84-xxH560 broadband532.2223.83800
LCS-0625-38-xxH625532.2132.92700
LCS-0625-42-xxH625532.2182.33300
LCS-0730-77-xxH730532.2185.93500
LCS-0850-68-xxH850532.2183.755500
LCS-6500-33-xxHglacier white, 6,500K532.293.72000
LCS-6500-65-xxHglacier white, 6,500K532.2183.73500

1. Clear aperture diameter. Use these two-digit numbers to replace xx in the part number. 2. Maximum CW output achievable with a matching BLS-13000-1 or a BLS-18000-1 BioLED control module. 3. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Discontinued Parts

Part NumberType 2
(A or B)
Wavelength (nm)Half Diverging Angle(deg.)Iop(mA)Vop(V)Typical Output
Power (mW)3
φ 11mm 1 φ 22mm 1 φ 38mm 1 φ 48mm 1
LCS-0365-02-xxA3653.41.710.755003.880
LCS-0365-07-xxB3656.83.421.550015400
LCS-0365-11-xxB3656.83.421.570015.8500
LCS-0380-03-xxA3803.41.710.7510003.2120
LCS-0380-13-xxB3806.83.421.5100012.8360
LCS-0385-02-xxA3853.41.710.755003.8100
LCS-0390-03-xxA3903.41.710.7510003.1250
LCS-0390-12-xxB3906.83.421.5100012.4750
LCS-0400-05-xxA40052.51.51.110004.1240
LCS-0420-02-xxA4203.41.710.757003100
LCS-0420-03-xxA4203.41.710.7510003310
LCS-0420-12-xxB4206.83.421.5100012930
LCS-0425-03-xxA4253.41.710.7510003290
LCS-0425-12-xxB4256.83.421.5100012870
LCS-0455-05-xxA45510532.27006.8350
LCS-0490-03-xxA49052.51.51.17003.7120
LCS-0530-13-22B5302.81.40.850.6524004.9290
LCS-0530-13-22-JJ530NA1.4NANA24004.9290
LCS-0560-02-xxA560 broadband3.41.710.757002.9180
LCS-0590-10-xxB59010532.2100010200
LCS-0657-01-xxA65752.51.51.13502.4100
LCS-0850-02-xxA850, 2W3.41.710.7510002.1240

1. Clear aperture diameter. Use these two-digit numbers to replace xx in the part number; and 2. Type-A and Type-B collimator sources have different installation drawings. Type-A does not include a cooling fan, whereas Type-B does. When ordering an LED controller for a Type-B LED, please make sure to upgrade the AC/DC power adapter from the ‘standard’ 12V to 24V. For certain LED controllers, it is not recommended to mix Type-A and Type-B LEDs on the same controller. Please check controller specification to confirm. 3. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.





Features

  • Interchangeable aspherical collimating lens
  • High numerical aperture (NA)
  • High power (up to 50W)
  • Wide range of available wavelengths
  • Adjustable focus
  • Optional focusing module
  • Optional lightguide adapter
  • Multiple mounting features for lab and OEM applications
  • Integrated heat sink
  • Cooling fan for >7W models

Applications

  • Microscope illuminator
  • General purpose light source
  • Fiber coupling (with optional focusing module)

 

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.