Precision LED Spotlights with Uniform Illumination – Close Range

$655.00USD$2,040.00USD

Mightex’s PLS- series precision LED spotlights are a general-purpose light source that can be used where uniform and high-intensity illumination is required. State-of-the-art high-power LED emitter and a proprietary high-NA multi-element aspherical optical system combine to produce a high-power, uniform illumination spot with a highly-delineated edge. Close range version for working distance between 7.5cm to 10cm.

Customize your product

Clear
  • Product Details
  • Specifications
  • Overview
  • Downloads
  • Drawings
  • Packing List

Mightex’s precision LED spotlight consists of a state-of-the-art high-power LED emitter and a proprietary high-NA multi-element aspherical optical system. The result is a high-power, uniform illumination spot with a highly-delineated edge.

Mightex’s PLS- series precision LED spotlights are a general-purpose light source that can be used where uniform and high-intensity illumination is required. The projection lens at the front of the spotlight can be slid and locked to focus the illumination pattern at different working distances. With the standard projection lens, the spot diameter is linearly proportional to working distance.

The LED emitters are mounted directly on the metal base of the light source which also features an integrated heatsink. This configuration minimizes thermal resistance between the LED emitter and the heatsink, resulting in better heat dissipation.

Multi-chip LED emitters (i.e. Type-B) have been added to the product portfolio. Some of these 7W to 15W LEDs have total optical power exceeding 500mW, doubling the power of a single-chip LED. Such Type-B models with higher powers (7W and higher) feature a cooling fan and have a different form factor compared to Type-A models. Please examine the installation drawings carefully. Power supply for the cooling fan is included in the price of the Type-B precision LED spotlights.

The precision LED spotlight includes a 2-meter cable with two bare-wire terminals at the end. The light sources can be driven by Mightex LED controllers or other LED controllers and current sources.

IMPORTANT : (1) LED’s can ONLY be driven by a constant-current source, and NOT a voltage source (e.g. a battery, or a AC/DC power supply etc.); (2) Please always verify LED’s current rating first before applying current to the LED, and please always make sure NOT to apply current that is above the LED’s current rating.

Specifications: (Click here to download datasheet)

Minimum Working Distance: 75mm
Maximum Working Distance: 100mm
Spot Diameter:    10mm at minimum working distance. 17mm at maximum working distance.

Type-A and Type-B PLS

Part NumberType (A or B) 1 Wavelength (nm)Iop(mA)Vop(V)Typical Output Power (mW) 2
PLS-0340-010-02-CA3403504.311
PLS-0365-010-04-CA36510003.65180
PLS-0365-010-13-CB36535003.85720
PLS-0380-010-03-CA38010003.265
PLS-0385-010-04-CA38510003.65250
PLS-0385-010-07-CB38550015300
PLS-0385-010-11-CB38570015.5375
PLS-0385-010-13-CB38535003.75900
PLS-0390-010-03-CA39010003.1140
PLS-0395-010-03-CA39510003.1150
PLS-0400-010-03-CA40010003.1150
PLS-0400-010-04-CA40010003.5380
PLS-0400-010-17-CB400100016.6400
PLS-0405-010-03-CA40510003.1180
PLS-0410-010-03-CA41010003.1175
PLS-0415-010-03-CA41510003.1120
PLS-0430-010-02-CA4305003.8100
PLS-0455-010-CA45510003.0260
PLS-0470-010-CA47010003.9110
PLS-0470-010-14-CB47030004.6650
PLS-0470-010-15-CB470100015450
PLS-0471-010-02-CA471350375
PLS-0490-010-01-CA4903503.580
PLS-0505-010-CA50510003.965
PLS-0505-010-12-CB505100012.2185
PLS-0530-010-CA53010002.85100
PLS-0530-010-15-CB530100015200
PLS-0540-010-14-CB540 broadband30004.6260
PLS-0560-010-02-CA560 broadband7002.995
PLS-0590-010-CA59010003.935
PLS-0590-010-05-CB5905009.5130
PLS-0617-010-CA61710003.980
PLS-0617-010-10-CB617100010.8200
PLS-0625-010-CA62510003.990
PLS-0625-010-07-CB6257009.6155
PLS-0656-010-CA65610003.9180
PLS-0656-010-07-CB6567009.6420
PLS-0680-010-02-CA6806002.720
PLS-0700-010-01-CA7005002.127
PLS-0720-010-01-CA7206002.239
PLS-0740-010-03-CA74010002.5100
PLS-0740-010-10-CB74010009.5300
PLS-0780-010-CA7808002.560
PLS-0810-010-02-CA8108002.265
PLS-0850-010-03-CA850, 3W10003220
PLS-0870-010-01-CA8707001.960
PLS-0910-010-02-CA91010001.960
PLS-0940-010-CA9407001.550
PLS-0980-010-01-CA9805001.416
PLS-6500-010-CAGlacier white 6,500K10003.6100
PLS-6500-010-15-CBGlacier white 6,500K100015400
PLS-5500-010-CACool white 5,500K10003.985
PLS-5500-010-12-CBCool white 5,500K100012400
PLS-4000-010-CAWarm white 4,000K10003.985
PLS-3000-010-CAWarm white 3,000K10002.870
PLS-3000-010-12-CBWarm white 3,000K100012320

1. Type-A and Type-B LED sources have different installation drawings. The former does not include a cooling fan, whereas the latter does. When ordering an LED controller for a Type-B LED, please make sure to upgrade the AC/DC power adapter from the ‘standard’ 12V to 24V (P/N: ACC-SLC-24VU). For certain LED controllers, it is not recommended to mix Type-A and Type-B LEDs on the same controller. Please check controller specification to confirm. 2. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Type-H PLS

Part NumberWavelength (nm)Iop(A)Vop(V)Typical Output Power (mW) 1
PLS-0365-010-76-C365184.2640
PLS-0405-010-65-C405183.6420
PLS-0405-010-89-C405243.7500
PLS-0470-010-50-C470133.8630
PLS-0470-010-61-C470183.4750
PLS-0470-010-92-C470273.4900
PLS-0525-010-60-C525134.6240
PLS-0525-010-79-C525184.4280
PLS-0560-010-68-C560 broadband183.8950
PLS-0560-010-84-C560 broadband223.81000
PLS-0625-010-38-C625132.9490
PLS-0625-010-42-C625182.3600
PLS-0730-010-77-C730185.9650
PLS-6500-010-33-CGlacier white 6,500K93.7400
PLS-6500-010-65-CGlacier white 6,500K183.7680

1. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.

Discontinued Parts

Part NumberType (A or B) 1 Wavelength (nm)Iop(mA)Vop(V)Typical Output Power (mW) 2
PLS-0365-010-CA3655003.8115
PLS-0365-010-07-CB36550015250
PLS-0365-010-11-CB36570015.8310
PLS-0365-010-48-CH365120003.9320
PLS-0385-010-CA3855003.850
PLS-0400-010-05-CA40010004.1120
PLS-0405-010-50-CH405130003.8390
PLS-0420-010-CA4205003.835
PLS-0420-010-03-CA42010003.1120
PLS-0420-010-12-CB420100012500
PLS-0425-010-03-CA42510003160
PLS-0590-010-10-CB590100010140
PLS-0657-010-CA6573502.450
PLS-0850-010-CA850, 2W10002.185

1. Type-A and Type-B LED sources have different installation drawings. The former does not include a cooling fan, whereas the latter does. When ordering an LED controller for a Type-B LED, please make sure to upgrade the AC/DC power adapter from the ‘standard’ 12V to 24V (P/N: ACC-SLC-24VU). For certain LED controllers, it is not recommended to mix Type-A and Type-B LEDs on the same controller. Please check controller specification to confirm. 2. Due to variations in the manufacturing process and operating parameters such as temperature and current, the actual output of any given LED may vary. Specifications are intended to be used as a guideline.



FEATURES

  • Uniform illumination spot with a highly delineated edge
  • High output power
  • Multi-element aspherical optics
  • Wide range of available wavelengths
  • Adjustable focus
  • Multiple mounting features for lab and OEM applications
  • Integrated heatsink

APPLICATIONS

  • General purpose light source
  • Machine vision
  • Bio-photonics
  • Semiconductor equipment
  • UV curing

Packing List:

  • 1x Precision LED Spotlight (- no accessories)
  • 1x power adapter for cooling fan (Note: for Type-B LED only)