USB2.0 Monochrome 1.3MP CMOS Cameras, Board-Level

$232.00USD$427.00USD

Mightex USB 2.0 monochrome cameras are designed for a wide variety of applications such as machine vision, digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. With a USB2.0 interface and powerful PC software, the camera delivers excellent quality images, and the frame rate can be as high as 24 fps in full resolution and up to 600 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. The cameras have 4-pin GPIOs and optional built-in LED drivers. A DirectShow driver and a TWAIN driver are also provided in order to easily link the cameras with users’ applications.

Customize your product

Clear
  • Product Details
  • Specifications
  • Overview
  • Downloads
  • Drawings
  • Packing List
  • Software

Mightex USB 2.0 monochrome cameras are designed for a wide variety of applications such as machine vision, digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. With a USB2.0 interface and powerful PC software, the camera delivers excellent quality images, and the frame rate can be as high as 24 fps in full resolution and up to 600 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. The cameras have 4-pin GPIOs and optional built-in LED drivers. A DirectShow driver and a TWAIN driver are also provided in order to easily link the cameras with users’ applications.

USB2.0 powered – no need for external power supply.

 

[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Specifications (Click here to download datasheet)

ParametersMCN-B013-U 
MCN-B013-US
GLN-B013-U 
GLN-B013-US
MCE-B013-U 
MCE-B013-US
MLE-B013-U 
MLE-B013-US
Unit
Board-Level/EnclosedBoard-LevelBoard-LevelEnclosedEnclosed
Number of GPIOs4No4No
Built-in LED DriversNoYesNoYes
Resolution1,280 x 1,024 Monochrome
CMOS Chip½" (5:4) Micron MT9M001, Rolling Shutter
Pixel Size5.2 x 5.2μm
Active Imager Size6.66 x 5.32mm
Scanning SystemProgressive
Dynamic Range68dB
Sensor SNR45dB
Gray Level8bit
Responsivity2.1V/lux-sec
Frame Rates* (@48MHz Clock)24 @1280x1024, 32 @1024x768, 50 @800x600, 70 @640x480, 180 @320x240, 300 @160x120, 450 @64x64, 600 @32x32fps
Sub Resolutions1024x768, 800x600, 640x480, 320x240, 160x120, 64x64, 32x32
Shutter Speed (Exposure Time)0.04 ~ 750ms
Hardware Gains12dB
Trigger ModeWith external trigger
Trigger CableACC-CAM-DIN8
Lens MountC– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)
Built-in FiltersIR-cut (factory standard), No filter, or IR-pass
Power Consumption< 1.0 (excluding LED drivers, if applicable)W
Number of LED Driver ChannelsN.A.4N.A.4
LED Driver Max. Output VoltageN.A.5N.A.5V
LED Driver Max. Output Current (total)N.A.250N.A.250mA
Dimension51 x 51 x 29 (CS-mount) 
51 x 51 x 34 (C-mount)
58 x 58 x 34 (CS-mount) 
58 x 58 x 39 (C-mount)
mm
Weight (excluding lens)48150g
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                 Windows 2000, XP, Vista, Windows 7, 8, and 10
RAM:                                        256MB or greater
Hard Disk Space:                   30MB for software installation, plus additional space for storing captured images
Display:                                    24bit True Color

USB2.0 Host Controller:      (Recommended) Intel Integrated Host Controller.

Applications:

  • Digital microscopy
  • Machine vision
  • Medical imaging
  • Semiconductor equipment
  • Test instruments
  • Document scanners
  • 2D barcode readers
  • Web camera and security video

Features:

  • Higher resolution than color sensors
  • Built-in LED drivers
  • 4-pin GPIOs
  • Higher sensitivity especially in IR
  • Simpler data processing
  • 1280 x 1024 active imaging pixels
  • High-speed USB2.0 (480Mb/s)
  • Low noise
  • 24fps @1280×1024 to 200fps @320×240 to 600fps @32×32
  • Digital output, no need for frame grabber
  • Custom programmable with SDK provided
  • TWAIN driver
  • DirectShow driver
  • External and software trigger
  • Strobe output for external flash
  • ROI & pixel skipping/binning
  • No need for external power supply
  • OEM versions available

Document Downloads: 

Mechanical Drawing Downloads:

Software Download

INSTALLATION DRAWINGS

Board Level Camera, with CS-mount


Enclosed Camera, with CS-mount

WHAT’S IN A C-MOUNT CAMERA?

Standard Packing List:

  1. 1x Camera (w/o an imaging lens)
  2. 1x IR-cut filter (pre-installed, retail version only)
  3. 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)

Software Download

Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.

GRAPHICAL USER INTERFACE OF APPLICATION SOFTWARE

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.