5MP Color CMOS Cameras, with 32MB on-Board Memory

$376.00USD$386.00USD

Mightex USB 2.0 cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. The frame rate can be as high as 6 fps in full resolution and up to 300 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included, and a USB command set protocol is provided for non-Windows based applications. A Linux Driver is also available upon request.

USB2.0 powered – no need for external power supply.

[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

 

Customize your product

Clear
  • Specifications
  • FAQs
  • Overview
  • Downloads
  • Drawings
  • Packing List
  • Software

Specifications (Click here to download datasheet)

ParametersBCN-C050-UBCE-C050-UUnit
Board-Level/EnclosedBoard-LevelEnclosed
Number of GPIOs44
Resolution2,592 x 1,944 Color
CMOS Chip1/2.5" (5:4) Micron MT9P031, Rolling Shutter
Pixel Size2.2 x 2.2μm
Scanning SystemProgressive
Dynamic Range70dB
Sensor SNR38dB
Gray Level8bit
Responsivity1.4V/lux-sec
On-Board Memory32MB
Frame Rates* (@48MHz Clock)6 @2592 x 1944, 9 @2048 x 1536 13 @1600 x 1200 18 @1280 x 1024 28 @1024 x 768 40 @800 x 600 50 @752 x 480 56 @640 x 480 100 @320 x 240fps
Sub ResolutionsSupport Arbitrary ROI, (X, Y) with X and Y multiples of 4
Shutter Speed (Exposure Time)0.05 ~ 750ms
Hardware Gains1x ~ 16x
Trigger ModeWith external trigger
Trigger CableACC-CAM-DIN8
Strobe OutYes
Lens MountC– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)
Built-in FiltersIR-cut (factory standard) or custom
Power Consumption< 1.8W
Dimension51 x 51 x 29 (CS-mount)
51 x 51 x 34 (C-mount)
58 x 58 x 34 (CS-mount)
58 x 58 x 39 (C-mount)
mm
Weight (excluding lens)80150g

* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                 Windows 2000, XP, Vista, Windows 7, 8, and 10
RAM:                                        256M or greater
Hard Disk Space:                   10M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color

USB2.0 Host Controller:       (Recommended) Intel Integrated Host Controller.

Applications:

  • Machine vision and stereo vision
  • Medical imaging
  • Semiconductor equipment
  • Test instruments
  • High-quality ID photo capture
  • Document scanners
  • Digital microscopy
  •  Web camera and security video

Features:

  • 32MB on-board memory (3 frames at full resolution)
  • Support simultaneous image capturing from multiple cameras
  • 4-pin GPIOs
  • 2592 x 1944active imaging pixels
  • Ultra compact
  • High-speed USB2.0 (480Mb/s)
  • Digital output, no need for frame grabber
  • Custom programmable with SDK provided
  • DirectShow driver
  • TWAIN driver
  • USB command set protocol for non-Windows-based applications
  • External and software trigger
  • Strobe output for external flash
  • ROI & pixel skipping/binning
  • No need for external power supply
  • OEM versions available

Document Downloads: 

Mechanical Drawing Downloads:

Software Download

Mechanical Drawing Downloads:

WHAT’S IN A C-MOUNT CAMERA?

Standard Packing List:

  1. 1x Camera (w/o an imaging lens)
  2. 1x IR-cut filter (pre-installed, retail version only)
  3. 1x USB Cable (Note: Trigger cable is NOT included and needs to be ordered separately)

Software Download

  • Buffered camera software package download (.zip file, 10MB), including User’s Guide, SDK, Windows-based application software with GUI, DirectShow driver, TWAIN Driver, and example codes in VB, C++ and Delphi.

Notes:
(1) For a C-mount enclosed camera order, a CS-mount enclosed camera would be shipped along with a CS-to-C mount adapter (P/N: ACC-CAM-CSC). For details of converting a CS-mount camera to a C-mount camera, please click here.

GRAPHICAL USER INTERFACE OF APPLICATION SOFTWARE

Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated. Please call/email for volume pricing.