S-Series Ultra-Compact USB2.0 Monochrome 1.3MP CMOS Cameras

SCE-B013-U, SCN-B013-U


Buffered CMOS cameras High-sensitivity CCD cameras Camera Lenses Trigger/GPIO Cables Default

Buffered CMOS cameras (B-series)
High-sensitivity CCD cameras
Window-less cameras (for laser profiling or UV imaging)		 Camera lenses
Optical filters for cameras
Trigger/GPIO cables		 Cables and brackets
Lens mounts
Lens mount adapters

Mightex S-Series compact USB 2.0 cameras are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have external trigger-in, strobe-out, and GPIOs. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 20 fps in full resolution and up to 150 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A USB command set protocol is also provided for non-Windows based applications.

USB2.0 powered - no need for external power supply.

[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Click here to download Spec sheet
 

PERFORMANCE SPECIFICATIONS

Parameters SCN-B013-U SCE-B013-U Unit
Board-Level/Enclosed Board-Level Enclosed  
Number of GPIOs 4 4  
Resolution 1,280 x 1,024 Monochrome  
CMOS Chip ½" (5:4) Micron MT9M001, Rolling Shutter  
Pixel Size 5.2 x 5.2 µm
Active Imager Size 6.66 x 5.32 mm
Scanning System Progressive  
Dynamic Range 68 dB
Sensor SNR 45 dB
Gray Level 8 bit
Responsivity 2.1 V/lux-sec
Frame Rates* (@48MHz Clock) 20 @1280 x 1024
31 @1024 x 768
45 @800 x 600
52 @752 x 480
52 @640 x 480
120 @320 x 240 		fps
Sub Resolutions Support Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4  
Shutter Speed (Exposure Time) 1 ~ 750 ms
Hardware Gains 0.125x ~ 8x  
Trigger Mode With external trigger  
Trigger Cable ACC-CAM-CON8  
Strobe Out Yes  
Lens Mount C– mount or CS-mount
(M12.5-mount or custom-defined lens mount supported) 		 
Built-in Filters IR-cut (factory standard), No filter, or IR-pass  
Power Consumption < 1.0 W
Dimension 40 x 40 x 25 (CS-mount)
40 x 40 x 30 (C-mount) 		45 x 45 x 23 (CS-mount)
45 x 45 x 28 (C-mount) 		mm
Weight (excluding lens) 60 120 g
* The actual achievable frame rate depends on exposure time, as well as resources of PC system.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                           Pentium III 900MHz or better, or a compatible processor
Operating System:             Windows 2000, XP, Vista and Windows 7
RAM:                                    256M or greater
Hard Disk Space:              10M for software installation, plus additional space for storing captured images
Display:                               24bit True Color
USB2.0 Host Controller: (Recommended) Intel Integrated Host Controller.
Ordering Information:
Model Name Price Buy Now Availability
SCE-B013-U S-Series Ultra-Compact USB2.0 Monochrome 1.3MP CMOS Cameras, Enclosed  $319.00USD/ea 
SCN-B013-U S-Series Ultra-Compact USB2.0 Monochrome 1.3MP CMOS Cameras, Board-Level  $279.00USD/ea 
All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.