| Parameters |
BTN-BG04-U (C-mount)
BTN-BG04-US (CS-mount) |
BTE-BG04-U (C-mount)
BTE-BG04-US (CS-mount) |
Unit |
| Board-Level/Enclosed |
Board-Level |
Enclosed |
|
| Number of GPIOs |
4 |
4 |
|
| Resolution |
752 x 480 Monochrome |
|
| CMOS Chip |
1/3" Micron MT9V032, Global Shutter (Micron TrueSNAP) |
|
| Pixel Size |
6.0 x 6.0 |
μm |
| Scanning System |
Progressive |
|
| Dynamic Range |
> 55 |
dB |
| Gray Level |
10 |
bit |
| Responsivity |
4.8 |
V/lux-sec |
| On-Board Memory |
32 |
MB |
| Frame Rates* (@26MHz Clock) |
8-bit operation
60@752x480, 65@640x480, 130@320x240, 220@160x120, 310@64 x 64 |
10-bit operation
36@752x480, 44@640x480, 130@320x240, 220@160x120, 310@64 x 64
|
fps |
| Sub Resolutions |
Support Arbitrary ROI (Nx, Ny), with Nx and Ny multiples of 4 |
|
| Shutter Speed (Exposure Time) |
0.05 ~ 750 |
ms |
| Hardware Gains |
1x ~ 4x
|
|
| Trigger Mode |
With external trigger |
|
| Trigger Cable |
ACC-CAM-DIN8 |
|
| Strobe Out |
Yes |
|
| Lens Mount |
C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported) |
|
| Built-in Filters |
No filter, IR-cut (standard), or IR-pass |
|
| Power Consumption |
< 1.8 |
W |
| Dimension |
51 x 51 x 29 (CS-mount) 51 x 51 x 34 (C-mount) |
58 x 58 x 34 (CS-mount) 58 x 58 x 39 (C-mount) |
mm |
| Weight (excluding lens) |
80 |
150 |
g |
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.
RECOMMENDED SYSTEM CONFIGURATIONS
Processor: Pentium III 900MHz or better, or a compatible processor
Operating System: Windows 2000, XP, Vista and Windows 7
RAM: 256M or greater
Hard Disk Space: 10M for software installation, plus additional space for storing captured images
Display: 24bit True Color
USB2.0 Host Controller: (Recommended) Intel Integrated Host Controller.