1.3MP Monochrome 10-bit CMOS Cameras, with 32MB on-Board Memory

BTE-B013-U, BTE-B013-US, BTN-B013-U, BTN-B013-US


S-Series Cameras High-sensitivity CCD cameras Camera Lenses Trigger/GPIO Cables Default

S-series CMOS cameras
High-sensitivity CCD cameras
Window-less cameras (for laser profiling or UV imaging)		 Camera lenses
Optical filters for cameras
Trigger/GPIO cables		 Cables and brackets
Lens mounts
Lens mount adapters

Mightex USB 2.0 cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 12 fps in full resolution and up to 150 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included, and a USB command set protocol is provided for non-Windows based applications. A Linux Driver is also available upon request.
USB2.0 powered - no need for external power supply.
 
[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]

Click here to download Spec sheet
 

Parameters BTN-B013-U (C-mount) BTE-B013-U (C-mount) Unit
Board-Level/Enclosed Board-Level Enclosed  
Number of GPIOs 4 4  
Resolution 1,280 × 1,024 Monochrome  
CMOS Chip ½" (5:4) Micron MT9M001, Rolling Shutter  
Pixel Size 5.2 × 5.2 μm
Active Imager Size 6.66 × 5.32 mm
Scanning System Progressive  
Dynamic Range 68 dB
Sensor SNR 45 dB
Gray Level 10 bit
Responsivity 2.1 V/lux-sec
Frame Rates* (@48MHz Clock) 12@1280 × 1024, 18@1024 × 768, 25@800 × 600, 28@752 × 480, 33@640 × 480, 70@320 × 240 fps
On-Board Memory 32 MB
Sub Resolutions Support Arbitrary ROI, (X, Y) with X and Y multiples of 4  
Shutter Speed (Exposure Time) 0.05 ~ 750 ms
Hardware Gains 0.125× ~ 8×  
Trigger Mode With external trigger  
Trigger Cable ACC-CAM-DIN8  
Strobe Out Yes  
Lens Mount C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)  
Built-in Filters IR-cut (factory standard), IR-pass or no filter  
Power Consumption < 1.8 W
Dimension 51 × 51 × 29 (CS-mount) 51 × 51 × 34 (C-mount) 58 × 58 × 34 (CS-mount) 58 × 58 × 39 (C-mount) mm
Weight (excluding lens) 80 150 g
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                   Windows 2000, XP, Vista and Windows 7
RAM:                                        256M or greater
Hard Disk Space:                     10M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color
USB2.0 Host Controller:           (Recommended) Intel Integrated Host Controller.
Ordering Information:
Model Name Price Buy Now Availability
BTE-B013-U Buffered 1.3MP mono CMOS camera,enclosed, 10-bit, with GPIOs and C-mount  $519.00USD/ea 
BTE-B013-US Buffered 1.3MP mono CMOS camera, enclosed, 10-bit, with GPIOs and CS-mount  $519.00USD/ea 
BTN-B013-U Buffered 1.3MP mono CMOS camera, board-level, 10-bit, with GPIOs and C-mount  $499.00USD/ea 
BTN-B013-US Buffered 1.3MP mono CMOS camera, board-level, 10-bit, with GPIOs and CS-mount  $499.00USD/ea 
All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.