Mightex USB 2.0 cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Frame rate can be as high as 6 fps in full resolution and up to 300 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included, and a USB command set protocol is provided for non-Windows based applications. A Linux Driver is also available upon request.
USB2.0 powered - no need for external power supply.
[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]
6 @2592 x 1944, 9 @2048 x 1536 13 @1600 x 1200 18 @1280 x 1024 28 @1024 x 768 40 @800 x 600 50 @752 x 480 56 @640 x 480 100 @320 x 240
Support Arbitrary ROI, (X, Y) with X and Y multiples of 4
Shutter Speed (Exposure Time)
0.05 ~ 750
1x ~ 16x
With external trigger
C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)
IR-cut (factory standard) or custom
51 x 51 x 29 (CS-mount) 51 x 51 x 34 (C-mount)
58 x 58 x 34 (CS-mount) 58 x 58 x 39 (C-mount)
Weight (excluding lens)
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.
RECOMMENDED SYSTEM CONFIGURATIONS
Processor: Pentium III 900MHz or better, or a compatible processor Operating System:Windows 2000, XP
, Vista and Windows 7
RAM: 256M or greater
Hard Disk Space: 10M for software installation, plus additional space for storing captured images
Display: 24bit True Color
USB2.0 Host Controller: (Recommended) Intel Integrated Host Controller.
Buffered 5MP color CMOS camera, enclosed, with GPIOs and C-mount
Buffered 5MP color CMOS camera, enclosed, with GPIOs and CS-mount
Buffered 5MP color CMOS camera, board level, with GPIOs and C-mount
Buffered 5MP color CMOS camera, board level, with GPIOs and CS-mount
All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.