1.3MP Monochrome 8-bit CMOS Cameras, with 32MB on-Board Memory

BCE-B013-U, BCE-B013-US, BCN-B013-U, BCN-B013-US

Mightex USB 2.0 cameras with frame buffers are optimized for machine-vision applications, and they can also be used for a wide variety of other applications such as digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Without a Bayer color filter on the sensor, monochrome cameras are also more sensitive than color sensors especially in near IR and UV regions. Frame rate can be as high as 25 fps in full resolution and up to 300 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. A DirectShow driver and a TWAIN driver are included, and a USB command set protocol is provided for non-Windows based applications. A Linux Driver is also available upon request.

USB2.0 powered - no need for external power supply.

Click here to download Spec sheet
 

Parameters BCN-B013-U (C-mount)
BCN-B013-US (CS-mount) 		BCE-B013-U (C-mount)
BCE-B013-US (CS-mount) 		Unit
Board-level/enclosed Board-level Enclosed  
Number of GPIOs 4 4  
Resolution 1280x1024 monochrome  
CMOS Chip ½" (5:4) Micron MT9M001, rolling shutter  
Pixel Size 5.2 x 5.2 micron
Active Imager Size 6.66 x 5.32 mm
Scanning System Progressive  
Dynamic Range 68 dB
Sensor SNR 45 dB
Gray Level 8 bit
Responsivity 2.1 V/lux-sec
On-board Memory 32 MB
Frame Rates* (@48MHz Clock) 25 @1280x1024 35 @1024x768 50 @800x600 55 @752x480 65 @640x480 140 @320x240 fps
Sub Resolutions Support arbitrary ROI, (X, Y) with X and Y multiples of 4  
Shutter Speed (Exposure time) 0.05~750 ms
Hardware Gains 0.125x ~ 8x  
Trigger Mode With external trigger  
Strobe Out Yes  
Lens mount C– mount or CS-mount
(M12.5-mount or custom-defined lens mount supported) 		 
Built-in Filters IR-cut (factory standard), or IR-passor no filter
  
Power consumption < 1.8 W
Dimension 51 x 51 x 29 (CS-mount)
51 x 51 x 34 (C-mount) 		58 x 58 x 34 (CS-mount)
58 x 58 x 39 (C-mount)		 mm
Weight (excluding lens) 80 150 g
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                   Windows 2000, XP, Vista and Windows 7
RAM:                                        256M or greater
Hard Disk Space:                     10M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color
USB2.0 Host Controller:           (Recommended) Intel Integrated Host Controller.
Ordering Information:
Model Name Price Buy Now Availability
BCE-B013-U Buffered 1.3MP mono CMOS camera, enclosed, 8-bit, with GPIOs and C-mount
Unit Price: $479.00USD/ea
10+ $431.00USD/ea
BCE-B013-US Buffered 1.3MP mono CMOS camera, enclosed, 8-bit, with GPIOs and CS-mount
Unit Price: $479.00USD/ea
10+ $431.00USD/ea
BCN-B013-U Buffered 1.3MP mono CMOS camera, board level, 8-bit, with GPIOs and C-mount
Unit Price: $429.00USD/ea
10+ $386.00USD/ea
BCN-B013-US Buffered 1.3MP mono CMOS camera, board level, 8-bit, with GPIOs and CS-mount
Unit Price: $429.00USD/ea
10+ $386.00USD/ea
All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.