High-Sensitivity USB2.0 Monochrome 1.4MP 1/2" CCD Cameras with Frame Buffers

CCE-B013-U, CCN-B013-U

Mightex USB2.0 cameras with frame buffers are optimized for machine-vision applications, and they can be also used for a wide variety of applications (such as industrial inspections, digital microscopy and medical imaging) which require good quality cameras that are easy to use and cost-effective. These cameras have built-in frame buffers, external trigger-in, strobe-out, and a powerful camera engine that supports multiple cameras. Monochrome cameras often exhibit 20% higher spatial resolution than their color counterparts because no pixel interpolation is necessary. Since there is no Bayer color filter on the sensor, monochrome cameras are more sensitive than color sensors, especially in near IR and UV regions. Frame rate can be as high as 15 fps in full resolution and up to 80fps using ROI mode. A user-friendly GUI based application software and an SDK are provided for custom software development. In addition, a DirectShow driver and a TWAIN driver are available to easily link the cameras with users’ applications. A USB command set protocol and a Linux driver are also provided for non-Windows based applications.

High Sensitivity, Low Noise

 

Click here to download Spec sheet
 

Parameters CCN-B013-U  CCE-B013-U Unit
Board-level/enclosed Board-level Enclosed  
Number of GPIOs 4 4  
Resolution 1392x1040 monochrome  
Image Sensor Chip ½” Sony ICX205AL, Global shutter  
Bit 8 or 12 bits
Pixel Size 4.65x4.65 micron
Active Imager Size
 7.60x6.20  mm
Scanning System Progressive  
On-board Memory 32 MB
Frame Rates* (@28MHz Clock) 15 @1392 x 1040, 29 @696 x 520 (2x2 Bin), 37 @464 x 344 (3x3 Bin), 49 @348 x 256 (4x4 Bin), 49 @348 x 256 (1:4 Skip) fps
Sub Resolutions 696 x 520(2x2 Bin), 464 x 344 (3x3 Bin), 348 x 256 (4x4 Bin), 348 x 256 (1:4 Skip)
  
Shutter Speed (Exposure time) 0.05ms~200,000 ms
Hardware Gains 6~43
  dB
Trigger Mode With external trigger  
Trigger Delay <25 micro-sec
Strobe Out Yes  
Lens mount C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)  
Built-in Filters  IR-cut (factory standard), or IR-pass, or No filter  
Power consumption < 1.8 W
Dimension 89 x 64 x 34 (CS-mount)
89 x 64 x 39 (C-mount)		 95 x 70 x 38.5 (CS-mount)
95 x 70 x 43.5 (C-mount)		 mm
Weight (excluding lens) 80 150 g
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.
** Part number of the trigger cable for external trigger : ACC-CAM-DIN8

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                   Windows 2000, XP, Vista and Windows 7
RAM:                                        256M or greater
Hard Disk Space:                     30M for software installation, plus additional space for storing captured images
Display:                                    24bit True Color
USB2.0 Host Controller:           (Recommended) Intel Integrated Host Controller.
 
Ordering Information:
Model Name Price Buy Now Availability
CCE-B013-U High-Sensitivity USB2.0 Monochrome 1.4MP CCD Cameras with Frame Buffers, C- & CS-mount, enclosed  $879.00USD/ea 
CCN-B013-U High-Sensitivity USB2.0 Monochrome 1.4MP CCD Cameras with Frame Buffers, C- & CS-mount, board level  $789.00USD/ea 
All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.