| Parameters |
BCN-B050-U (8-bit)
BTN-B050-U (12-bit) |
BCE-B050-U (8-bit)
BTE-B050-U (12-bit) |
Unit |
| Board-level/enclosed |
Board-level |
Enclosed |
|
| Number of GPIOs |
4 |
4 |
|
| Resolution |
2592 x 1944 mono |
|
| CMOS Chip |
1/2.5" Micron MT9P031, rolling shutter |
|
| Pixel Size |
2.2 x 2.2 |
micron |
| Scanning System |
Progressive |
|
| Dynamic Range |
70 |
dB |
| Sensor SNR |
38 |
dB |
| Gray Level |
8 or 12
|
bit |
| Responsivity |
1.4 |
V/lux-sec |
| On-board Memory |
32 |
MB |
| Frame Rates* (@48MHz Clock) |
8bit mode: 6 @2592x1944, 9 @2048x1536; 13 @1600x1200;18 @1280x1024; 28 @1024x768; 40 @800x600; 50 @752x480; 56 @640x480; 100 @320x240
12bit mode: 3 @2592x1944, 5 @2048x1536; 7 @1600x1200; 12 @1280x1024; 21 @1024x768; 33 @800x600; 43 @752x480; 51 @640x480; 100 @320x240
|
fps |
| Sub Resolutions |
Support arbitrary ROI, (X, Y) with X and Y multiples of 4 |
|
| Shutter Speed (Exposure time) |
0.05~750 |
ms |
| Hardware Gains |
1x ~ 16x
|
|
| Trigger Mode |
With external trigger |
|
| Strobe Out |
Yes |
|
| Lens mount |
C– mount or CS-mount
(M12.5-mount or custom-defined lens mount supported) |
|
| Built-in Filters |
IR-cut (factory standard) or custom |
|
| Power consumption |
< 1.8 |
W |
| Dimension |
51 x 51 x 29 (CS-mount)
51 x 51 x 34 (C-mount) |
58 x 58 x 34 (CS-mount)
58 x 58 x 39 (C-mount) |
mm |
| Weight (excluding lens) |
80 |
150 |
g |
*
The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.
RECOMMENDED SYSTEM CONFIGURATIONS
Processor: Pentium III 900MHz or better, or a compatible processor
Operating System: Windows 2000, XP, Vista and Windows 7
RAM: 256M or greater
Hard Disk Space: 10M for software installation, plus additional space for storing captured images
Display: 24bit True Color
USB2.0 Host Controller: (Recommended) Intel Integrated Host Controller.