BioLED Light Source Control Modules: Software/TTL Controlled

Fiber-Coupled Single Color Collimated single color Fiber-Coupled Multiple Colors Fiber-Coupled LEDs Collimated LEDs Lightguide-Coupled LED's Universal LED Controllers Default

BioLED optical heads
Fiber-coupled LED heads, single color
Fiber-coupled LED heads, multiple colors
Lightguide-coupled LED heads
BioLED optical heads, collimated
LED drivers, manual
Microscope adapters

Mightex BLS-SA/PL series BioLED control modules are modularized fully-customizable turn-key solutions for optogenetics, fluorescence excitation, and other biophotonics applications. Precisely-timed and high-intensity light pulses are required in optogenetics experiments to activate channel-rhodopsins (ChR2, ChR1 etc.) and halorhodopsins (NpHR) in order to excite and inhibit neurons. To meet these requirements, Mightex has developed a proprietary “IntelliPulsing” technology to allow BLS-series sources to output significantly higher power in pulse mode than what the LEDs are rated for in CW mode.

The control module features a linear LED driver design that eliminates light intensity ripples and oscillations often observed when low-cost buckpuck nonlinear drivers are used. Clean and highly repeatable pulses are critical to quantitative experiments. Both CW mode and pulse modes are supported. Time resolution of the control module is 20us and light intensity can be adjusted with 0.1% increments. Each driving channel on the control module has its own TTL trigger input. Rising edge, falling edge, and follower mode are supported in the trigger mode.

Mightex BioLED light source solutions come with a Windows-based operation software featuring an intuitive yet powerful graphic user interface. A software development kit (SDK) is also provided for user integration into environment such as Labview and Matlab.

An optional touch-screen control pad (P/N: BLS-PAD-000) is available (see photo below), with which customers can control LEDs without a computer.


The control module can also be operated without being connected to a computer or a touch-screen pad. This is because custom-defined pulse sequences can be programmed and stored into the control module (through software), after which the light sources can be operated alone and triggered by external TTL pulses.

Here is a step-by-step guide on how to order a BioLED light source solution:

Step-1: Add a BioLED Control Module (P/N: BLS-SA04-US or BLS-SA02-US) to shopping cart;

Step-2: Add desired BLS-series Optical Heads (e.g. BLS-FCS-0470 etc.) to shopping cart;

Step-3: In the notes section, mark the channel positions on the BioLED Control Module for each Optical Head. For example: Channel#1: BLS-FCS-0470, Channel#2: BLS-PLS-0590-030, Channel#3: 530nm LED in BLS-WFC-H2-0530-0625, and Channel#4: 625nm LED in BLS-WFC-H2-0530-0625. Order completed; and

Step-4: (Optional) Add touch-screen control pad
(P/N: BLS-PAD-000) to shopping cart.


Electrical Specifications for Control Modules

Synchronization with Polygon400

Number of channels
Power supply, Vdc
9 ~ 24
Output intensity resolution
Time resolution
Maximum number of pulses in one period 21
Maximum repeat count of pulse sequence 108
External trigger level
Trigger connector type
Max. Trigger delay
Optical Head connector type
2-pin Aero connector
Host interface
USB or RS232, selectable
Non-volatile memory
213 (L) x 156 (W) x 73 (H)
*. An opto-coupler is used for each trigger input, which can accept voltage from 3.6 ~ 12 V as “H”. Please note that the trigger source should be capable of providing at least 5mA current when it’s “H”.

**. Built-in non-volatile memory allows all the operation parameters to be stored on the BioLED Control Module, thus the device can work without a host connected.
Rear Panel Layout

Ordering Information:
Model Name Price Buy Now Availability
BLS-PAD-000 Touch-screen control pad for BLS-SA/PL series BioLED Light Source Control Module, including a 7 tablet with touch-based software for manually controlling intensities of LED light sources.  $299.00USD/ea 
BLS-PL02-US BioLED Light Source Control Module, 2-channel, with additional synchronization features to work with Polygon400 Dynamic Spatial Illuminators.  $1,129.00USD/ea 
BLS-PL04-US BioLED Light Source Control Module, 4-channel, with additional synchronization features to work with Polygon400 Dynamic Spatial Illuminators.  $1,359.00USD/ea 
BLS-SA02-US BioLED Light Source Control Module, 2-channel  $905.00USD/ea 
BLS-SA04-US BioLED Light Source Control Module, 4-channel  $1,129.00USD/ea 
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email or