USB2.0 Monochrome 1.3MP CMOS Cameras, Enclosed

Mightex USB 2.0 monochrome cameras are designed for a wide variety of applications such as machine vision, digital microscopy and medical imaging, where quality, ease of use, and cost-effectiveness are crucial. With a USB2.0 interface and powerful PC software, the camera delivers excellent quality images, and the frame rate can be as high as 24 fps in full resolution and up to 600 fps using ROI mode. In addition, a user-friendly GUI based application software and an SDK are provided for custom software development. The cameras have 4-pin GPIOs and optional built-in LED drivers. A DirectShow driver and a TWAIN driver are also provided in order to easily link the cameras with users' applications.

USB2.0 powered - no need for external power supply.
 
[Note: Board-level cameras are designed for OEM applications, when a system-level enclosure is usually provided. One should be properly grounded when handling a board-level camera, in order to avoid Electro-Static Discharge (ESD) related damages. ESD related damages (which are considered as mis-handling) are not covered by product warranty. For lab use, it is strongly recommended that one choose an enclosed camera, instead of a board-level one.]
 
 

 

Specifications:

Parameters MCN-B013-U
MCN-B013-US
GLN-B013-U
GLN-B013-US
MCE-B013-U
MCE-B013-US
MLE-B013-U
MLE-B013-US
Unit
Board-Level/Enclosed Board-Level Board-Level Enclosed Enclosed  
Number of GPIOs 4 No 4 No  
Built-in LED Drivers No Yes No Yes  
Resolution 1,280 x 1,024 Monochrome  
CMOS Chip ½" (5:4) Micron MT9M001, Rolling Shutter  
Pixel Size 5.2 x 5.2
μm
Active Imager Size 6.66 x 5.32 mm
Scanning System Progressive  
Dynamic Range 68 dB
Sensor SNR 45 dB
Gray Level 8 bit
Responsivity 2.1 V/lux-sec
Frame Rates* (@48MHz Clock) 24 @1280x1024 32 @1024x768 50 @800x600 70 @640x480 180 @320x240 300 @160x120 450 @64x64 600 @32x32 fps
Sub Resolutions 1024x768, 800x600, 640x480, 320x240, 160x120, 64x64, 32x32  
Shutter Speed (Exposure Time) 0.04 ~ 750 ms
Hardware Gains 12 dB
Trigger Mode With external trigger  
Trigger Cable ACC-CAM-DIN8  
Lens Mount C– mount or CS-mount (M12.5-mount or custom-defined lens mount supported)  
Built-in Filters IR-cut (factory standard), No filter, or IR-pass  
Power Consumption < 1.0 (excluding LED drivers, if applicable) W
Number of LED Driver Channels N.A. 4 N.A. 4  
LED Driver Max. Output Voltage N.A. 5 N.A. 5 V
LED Driver Max. Output Current (total) N.A. 250 N.A. 250 mA
Dimension 51 x 51 x 29 (CS-mount)
51 x 51 x 34 (C-mount)
58 x 58 x 34 (CS-mount)
58 x 58 x 39 (C-mount)
mm
Weight (excluding lens) 48 150 g
* The actual achievable frame rate may vary, depending on exposure time setting as well as available PC resources.

RECOMMENDED SYSTEM CONFIGURATIONS

Processor:                                Pentium III 900MHz or better, or a compatible processor
Operating System:                  
Windows 2000, XP, Vista, Windows 7 and 8
RAM:                                        256MB or greater
Hard Disk Space:                     30MB for software installation, plus additional space for storing captured images
Display:                                    24bit True Color

USB2.0 Host Controller:           (Recommended) Intel Integrated Host Controller.
 
 

Ordering Information:
Model Name Price Buy Now Availability
MCE-B013-U USB2.0 CMOS camera, 1.3MP mono, Enclosed, w/ GPIOs, C-mount  $199.00USD/ea 
MCE-B013-US USB2.0 CMOS camera, 1.3MP mono, Enclosed, w/ GPIOs, CS-mount  $199.00USD/ea 
MLE-B013-U USB2.0 CMOS camera, 1.3MP mono, Enclosed, w/ LED drivers, C-mount  $369.00USD/ea 
MLE-B013-US USB2.0 CMOS camera, 1.3MP mono, Enclosed, w/ LED drivers, CS-mount  $369.00USD/ea 
Product specifications are subject to change without prior notice. All prices are FOB California, unless otherwise stated.
Please call/email for volume pricing.
For sales and customer support:

Please call (USA) +1-925-218-1885 or (Canada) +1-416-840-4991,
or email sales@mightexsystems.com or sales@mightex.com.